395A/394A Wheel Bearing For SCANIA
The DUHUI Bearing 395A/394A wheel bearing is an inch-series single-row tapered roller bearing assembly designed for heavy-duty commercial vehicle and industrial drivetrain applications. With a 66.675 mm bore, 110 mm outer diameter, and 22 mm total width, this bearing supports combined radial and axial loads in axle housings, wheel hubs, and gearboxes. It matches Scania OE specification 0214478 and is cross-referenced with Timken 395A/394A and SET365.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2414 |
| Part Number | 395A/394A |
| Product Type | Tapered Roller Bearing – Single Row, Inch Series |
| Bore Diameter (d) | 66.68 mm (2.625 inch) |
| Outer Diameter (D) | 110.00 mm (4.331 inch) |
| Width (B) | 22.00 mm (0.866 inch) |
| Cone Number | 395A |
| Cup Number | 394A |
| Material | High Carbon Chrome Steel (GCr15) |
| Weight | 0.73 kg (1.61 lb) |
Note: Dimensional data is based on Timken and aftermarket manufacturer specifications for the 395A/394A assembly. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2414
OE Numbers:
0214478, 214478, CC723
Reference Numbers (Interchange):
Timken: 395A/394A, SET365
Vehicle Fitment
SCANIA: Various commercial vehicle models (verify OE number and dimensions before ordering)
ROLLS-ROYCE: Various models (verify OE number and dimensions before ordering)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller design supports combined radial and axial loads in one direction – suitable for heavy-duty commercial vehicle axle and wheel hub applications.
- Inch-series configuration with 66.675 mm bore and 110 mm outer diameter matches Timken 395A/394A and Scania OE 0214478 for direct replacement.
- Separable cup and cone construction (395A cone / 394A cup) simplifies installation and maintenance – inner ring with roller assembly can be mounted independently.
- Heat-treated GCr15 bearing steel with precision-ground raceways ensures consistent load distribution and wear resistance in demanding commercial vehicle applications.
- Open-type configuration supports splash lubrication and oil bath systems common in heavy-duty axle and hub applications.
- Cross-referenced with Rolls-Royce CC723 – confirmed interchange available.
Installation Notes
- Confirm bore diameter (66.675 mm) and outer diameter (110.00 mm) match your existing bearing and housing before installation.
- This bearing is a combination of cone (395A) and cup (394A) – the cone includes the inner ring with cage and roller set, while the cup is the outer ring.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Single-row tapered roller bearings must be mounted in mirror-image arrangement with a second tapered roller bearing to accommodate axial loads in both directions.
- Set bearing preload according to vehicle manufacturer specifications – tapered rollers require proper adjustment for axle and wheel hub operation.
- Lubricate with high-quality gear oil or grease – refer to the vehicle service manual for viscosity grade and lubrication method.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tapered roller bearings and automotive components to OE specifications. Contact us
