VKBA6857 Wheel Bearing Kits For HONDA
The DUHUI Bearing VKBA6857 is a complete rear wheel bearing kit designed for Honda CR-V RD1 models from 1997 to 2001. This kit includes one hub assembly with an integrated ABS sensor, matching OE specifications including 42200S10A01 and 42200S10A00. It is directly interchangeable with SKF VKBA6857, SNR R174.74, and FAG 713617830.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK796 |
| Part Number | VKBA6857 |
| Flange Diameter | 140.00 mm (5.512 inch) |
| Wheel Stud Quantity | 5 |
| Position | Rear Axle |
| ABS Sensor | Integrated |
| Kit Contents | Hub x1 |
Note: Dimensional data is based on available sources. This is a rear wheel bearing kit designed for Honda CR-V applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK796
OE Numbers: 42200S10A01, 42200S10A00, 42201S10008, QWB1157
Reference Numbers (Interchange):
SKF: VKBA6857
SNR: R174.74
FAG: 713617830
BRT: BRT6857
QUINTON HAZELL: QWB1157
Vehicle Fitment
HONDA: CR-V RD1 B20B2 – 1997-2001
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear hub assembly with integrated ABS sensor – plug-and-play compatibility
- Specifically engineered for Honda CR-V RD1 rear axle applications
- Direct interchange with SKF VKBA6857, SNR R174.74, and FAG 713617830
- Pre-assembled hub design eliminates the need for a shop press during installation
- Pre-loaded bearing with factory-set preload for consistent performance
- Multi-lip seal design provides contamination protection and retains lubricant
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – hub x1
- Confirm rear axle fitment for your specific Honda CR-V RD1 model (1997-2001)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new assembly
- Torque the four flange bolts to Honda service manual specifications
- After installation, verify the ABS sensor electrical connector is secure and the warning light clears
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
