VKBA6825 Wheel Bearing Kits For HONDA
The DUHUI Bearing VKBA6825 is a complete wheel bearing kit designed for Honda Jazz II hatchback models from 2001 to 2008. This kit includes one bearing, one circlip, and one retaining nut, matching OE specifications including 44300S6AD01 and 44300SAA003. It is directly interchangeable with SKF VKBA6825, SNR R174.14, and FAG 713617740.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK777 |
| Part Number | VKBA6825 |
| Inside Diameter | 32.00 mm (1.260 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 37.00 mm (1.457 inch) |
| Position | Front and Rear Axle |
| Kit Contents | Bearing x1, Circlip x1, Nut x1 |
Note: Dimensional data is based on available sources. This is a wheel bearing kit designed for Honda Jazz applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK777
OE Numbers: 44300S6AD01, 44300SAA003, 44300SCAE51, 90681SR3A10
Reference Numbers (Interchange):
SKF: VKBA6825
SNR: R174.14
FAG: 713617740
BRT: BRT6825
RUVILLE: 7414
SPIDAN: 27572
Vehicle Fitment
HONDA: JAZZ II Hatchback (GD) – 2001-2008
HONDA: FIT (GD) – 2001-2008
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete wheel bearing kit includes bearing, circlip, and retaining nut – all components for a full bearing replacement
- Specifically engineered for Honda Jazz / Fit applications
- Direct interchange with SKF VKBA6825, SNR R174.14, and FAG 713617740
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- All necessary installation hardware included – no additional parts required
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – bearing x1, circlip x1, and nut x1
- Confirm axle fitment for your specific Honda Jazz / Fit model (2001-2008)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new bearing
- Use the new circlip and nut supplied – do not reuse old retaining hardware
- Torque the retaining nut to Honda service manual specifications
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
