Wheel Bearing HM212049/11 For IVECO
The DUHUI HM212049/11 is a premium single-row tapered roller bearing designed for heavy-duty Iveco commercial vehicle hub applications. This bearing is manufactured to OE specifications, matching Iveco part number 42101665. It is directly interchangeable with Timken HM212049/HM212010, FAG KHM212049.212011, and NTN 4THM212049212011.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWB2552 |
| Part Number | HM212049/11 |
| Inside Diameter | 66.70 mm (2.626 inch) |
| Outside Diameter | 122.24 mm (4.812 inch) |
| Width | 38.10 mm (1.500 inch) |
| Cone Width | 38.35 mm (1.510 inch) |
| Cup Width | 29.72 mm (1.170 inch) |
| Bearing Type | Single Row Tapered Roller Bearing |
| Weight | 1.84 kg (4.06 lbs) |
Note: Dimensional data is based on available sources. This is a single-row tapered roller bearing designed for Iveco heavy-duty applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2552
OE Numbers: IVECO 42101665
Reference Numbers (Interchange):
FAG: KHM212049.212011
NTN: 4THM212049212011
TIMKEN: HM212049/HM212010, SET1152
KOYO: HM212049/HM212011
SKF: VKHB2286
Vehicle Fitment
IVECO: Heavy-duty commercial vehicle applications – consult vehicle service manual for specific model compatibility
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller bearing specifically designed for Iveco heavy-duty hub applications
- Precision-ground cone and cup raceways for smooth operation and reduced friction
- Manufactured from high-carbon chromium bearing steel (GCr15) for exceptional durability and wear resistance
- Separable design simplifies mounting, dismounting, and maintenance procedures
- Tapered geometry accommodates combined radial and axial loads in one direction
- Direct interchange with Timken HM212049/HM212010, FAG KHM212049.212011, and NTN equivalents
- Manufactured in an ISO/TS 16949 certified facility to OE specifications
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify dimensions (inside diameter 66.70 mm, outside diameter 122.24 mm, width 38.10 mm) against your original bearing
- Confirm fitment for your specific Iveco commercial vehicle model and axle configuration
- Clean the hub and spindle surfaces thoroughly before installation
- Use the separable design to correctly orient the cone and cup during installation
- Apply appropriate grease to the bearing and torque the retaining nut to Iveco service manual specifications
- Check for smooth rotation and proper end-play after installation
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
