6006-2RSNR Wheel Bearing
The DUHUI Bearing 6006-2RSNR is a single-row deep groove ball bearing with a 30 mm bore, 55 mm outer diameter, and 13 mm width. This automotive wheel bearing features contact rubber seals on both sides and a snap ring groove on the outer ring for secure axial location in the housing. It matches OE specification 6006-2RSNR and serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable sealed bearing solution for wheel hubs, electric motors, pumps, fans, and general industrial applications where axial positioning is required.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3651 |
| Part Number | 6006-2RSNR |
| Product Type | Single Row Deep Groove Ball Bearing |
| Bore Diameter (d) | 30.00 mm (1.181 inch) |
| Outer Diameter (D) | 55.00 mm (2.165 inch) |
| Width (B) | 13.00 mm (0.512 inch) |
| Seals | 2RS – Contact Rubber Seals Both Sides |
| Snap Ring | Fitted on Outer Ring |
| Weight | 0.12 kg (0.26 lb) |
| Bearing Material | Steel |
| Cage Material | Sheet Metal Cage |
| Clearance | Normal Radial Clearance (CN) |
| Number of Rows | 1 |
| Dynamic Load Rating | 13.8 kN |
| Static Load Rating | 8.3 kN |
| Temperature Range | -20°C to 120°C |
Note: Dimensional data is based on manufacturer published specifications from SKF, MISUMI, and RS-online catalogs. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3651
OE Numbers:
6006-2RSNR
Reference Numbers (Interchange):
SKF: 6006-2RS1NR
MISUMI: 6006-2RSNR
FAG: 6006-2RSNR
NSK: 6006-2RSNR
Vehicle Fitment
Please verify OE number, dimensions and vehicle configuration before ordering. Fitment data is not available for this part number.
Product Features
- Single-row deep groove ball bearing design supports radial loads and moderate axial loads in both directions. Simple and robust construction requires little maintenance and is suitable for high-speed applications.
- 2RS contact rubber seals on both sides provide excellent protection against dust, moisture, and contaminants while retaining lubricant for the service life of the bearing.
- Snap ring groove on the outer ring with fitted snap ring simplifies axial location in the housing, eliminating the need for additional positioning components.
- Optimized for low noise and low vibration, enabling high rotational speeds.
- Normal radial clearance (CN) provides standard operating clearances suitable for most general applications with normal operating temperatures and speeds.
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm bore diameter (30.00 mm) and outer diameter (55.00 mm) match your housing and shaft before installation.
- The snap ring is pre-fitted on the outer ring – verify snap ring dimensions match your housing groove specifications.
- This bearing is sealed on both sides – seals are non-removable and protect against contamination. Do not attempt to remove or disassemble the seals.
- Inspect the housing and shaft surfaces for wear or damage before installing new components.
- Apply even pressure when pressing the bearing into the housing – never apply force directly through the rolling elements. Do not use a hammer to strike the bearing.
- Bearing is factory-lubricated and sealed – no additional greasing required before installation.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
