HM8854210 Wheel Bearing For VOLVO
The DUHUI Bearing HM88649/10 tapered roller bearing is an inch-series single-row wheel bearing designed for differential and axle applications in Land Rover and Leyland vehicles. This OE-replacement component matches original specifications including HM88649/10, 607181, and 0494545, delivering reliable load support and durability for demanding drivetrain conditions.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | HM88649/10 |
| Product Type | Tapered Roller Bearing – Single Row, Inch Series |
| Inner Diameter (d) | 34.925 mm (1.375 inch) |
| Outer Diameter (D) | 72.233 mm (2.844 inch) |
| Width (T) | 25.400 mm (1.000 inch) |
| Cone Width (B) | 25.400 mm (1.000 inch) |
| Cup Width (C) | 19.842 mm (0.781 inch) |
| Radius (min) | 2.4 mm (0.094 inch) |
| Dynamic Load Rating (Cr) | 66.9 kN |
| Static Load Rating (Cor) | 87.4 kN |
| Grease Limit Speed | 5,700 rpm |
| Oil Limit Speed | 7,600 rpm |
Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers:
HM88649/10
Reference Numbers (Interchange):
KOYO: HM88649/10
LAND ROVER: 607181
LEYLAND: 0494545
TOYOTA: 90368-34049
Vehicle Fitment
LAND ROVER: Various models using HM88649/10 differential bearing
LEYLAND: Various models using HM88649/10 differential bearing
TOYOTA: CORONA (1978-1981, 3T engine, chassis TT130/TT132)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller design supports combined radial and thrust loads in differential and axle applications.
- Inch-series configuration matches original Land Rover and Leyland specifications for direct drop-in replacement.
- Interchangeable with major brands including KOYO, SKF, and NTN equivalents – confirmed cross-reference available.
- Heat-treated bearing steel with precision-ground raceways ensures consistent load distribution and wear resistance.
- Optimized roller geometry provides rated dynamic load of 66.9 kN and static load of 87.4 kN for demanding drivetrain conditions.
Installation Notes
- Confirm inner diameter (34.925 mm) and outer diameter (72.233 mm) match your existing bearing and housing before installation.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Set bearing preload according to vehicle manufacturer specifications – tapered rollers require proper adjustment for differential operation.
- Lubricate with high-quality gear oil or grease compatible with differential/axle applications – refer to your vehicle manual for viscosity grade.
- If replacing on a Toyota Corona (1978-1981), verify chassis and engine match the fitment data above.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tapered roller bearings and wheel bearings to OE specifications. Contact us
