HK1012 Wheel Bearing For Chrysler Citroen
The DUHUI Bearing HK1012 needle roller bearing is an open-type drawn cup bearing with a 10.00 mm bore, 14.00 mm outer diameter, and 12.00 mm width. Designed for applications where radial space is limited, this bearing is used in automotive transmissions, steering systems, and pump assemblies. The bearing meets OE specifications HK1012 with cross-references to AS-PL TS12E10 and INA HK1012RS .
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2578 |
| Part Number | HK1012 |
| Product Type | Needle Roller Bearing – Drawn Cup, Open Type |
| Bore Diameter (d) | 10.00 mm (0.394 inch) |
| Outer Diameter (D) | 14.00 mm (0.551 inch) |
| Width (C) | 12.00 mm (0.472 inch) |
| Enclosure | Open |
| Dynamic Load Rating (Cr) | 5.50 kN |
| Static Load Rating (C0r) | 6.80 kN |
| Grease Limit Speed | 14,600 rpm |
| Oil Limit Speed | 24,300 rpm |
| Operating Temperature Range | -30 to 140 °C |
| Weight | 0.005 kg (0.011 lb) |
Note: Dimensional and performance data is based on Schaeffler (INA) published specifications . Please verify measurements against your original bearing before ordering .
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2578
OE Numbers:
HK1012
Reference Numbers (Interchange):
AS-PL: TS12E10
INA: HK1012RS
SKF: HK 1012
Vehicle Fitment
CHRYSLER: SEBRING Convertible (JS) 2.0 CRD 2007-2010
CITROEN: BERLINGO / BERLINGO FIRST Box Body/MPV (M_) 1.9 D 70 (MBWJZ, MCWJZ) 1999-2011
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Drawn cup construction with thin-walled outer ring – provides high radial load capacity in a compact cross-section .
- Open-type design supports application-specific lubrication and allows for free oil circulation in transmission and pump assemblies .
- Cross-referenced with AS-PL TS12E10 and INA HK1012RS – verified interchange for aftermarket replacement .
- Heat-treated bearing steel with precision-ground raceways delivers consistent performance under high-speed operation .
- Rated for 5.50 kN dynamic load and 6.80 kN static load – suitable for automotive drivetrain components and accessories .
- Operating temperature range of -30 to 140 °C supports diverse under-hood environments .
Installation Notes
- Confirm bore diameter (10.00 mm) and outer diameter (14.00 mm) match your housing and shaft before installation.
- This bearing is designed for use on a hardened and ground shaft. If the shaft cannot serve as a raceway, order a suitable inner ring separately .
- Apply appropriate lubricant (grease or oil) during installation – refer to your equipment manual for viscosity specifications.
- Inspect the housing bore for wear or damage before installing the drawn cup bearing – the cup requires proper support for load distribution .
- When used with an inner ring, ensure the ring is fully seated and the assembly is correctly positioned within the housing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces needle roller bearings and automotive components to OE specifications. Contact us
