U3511 Wheel Bearing
The DUHUI Bearing U3511 cylindrical roller bearing is a single-row radial bearing with a 35 mm bore, 90 mm outer diameter, and 23 mm width. Designed for applications requiring high radial load capacity, this bearing is used in automotive transmissions, differentials, and wheel hub assemblies. The U3511 meets OE specifications and is interchangeable with equivalent SKF, NTN, and NSK models.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2576 |
| Part Number | U3511 |
| Product Type | Cylindrical Roller Bearing – Single Row |
| Bore Diameter (d) | 35.00 mm (1.378 inch) |
| Outer Diameter (D) | 90.00 mm (3.543 inch) |
| Width (B) | 23.00 mm (0.906 inch) |
| Enclosure | Open |
| Material | High Carbon Chromium Steel (GCr15) |
| Dynamic Load Rating (Cr) | 92.8 kN (20,860 lbf) |
| Static Load Rating (Cor) | 96.3 kN (21,650 lbf) |
| Grease Limit Speed | 6,200 rpm |
| Oil Limit Speed | 8,100 rpm |
| Weight | 0.740 kg (1.631 lb) |
Note: Dimensional and performance data is based on published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2576
OE Numbers:
U3511
Reference Numbers (Interchange):
SKF: U3511
NTN: U3511
NSK: U3511
Vehicle Fitment
This cylindrical roller bearing is used in transmissions, differentials, and wheel hub assemblies across multiple vehicle makes. Please verify fitment with your original part before ordering.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Cylindrical roller design with line contact between rollers and raceways – delivers high radial load capacity and low friction in transmission and wheel hub applications.
- 35 mm bore and 90 mm outer diameter configuration matches OE U3511 specifications for direct replacement.
- Open-type design supports splash lubrication and oil bath systems common in drivetrain applications.
- Heat-treated GCr15 bearing steel construction – precision-ground raceways for consistent performance and long service life.
- Rated for 92.8 kN dynamic load and 96.3 kN static load – supports demanding drivetrain and industrial applications.
Installation Notes
- Confirm bore diameter (35.00 mm) and outer diameter (90.00 mm) match your housing and shaft before installation.
- Inspect the shaft and housing for wear, scoring, or pitting – replace if damage is present.
- Apply appropriate lubricant (oil or grease) during installation – refer to your equipment manual for viscosity specifications.
- Ensure correct axial and radial clearances are set according to the specific application requirements.
- For wheel hub applications, verify all hub and bearing surfaces are clean and free of debris before assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces cylindrical roller bearings and automotive components to OE specifications. Contact us
