T2E0050 Wheel Bearing For BAIC-FOTON
The DUHUI Bearing T2E0050 wheel bearing is a metric-series single-row tapered roller bearing with a 50 mm bore, 100 mm outer diameter, and 34 mm width. Designed for FOTON commercial vehicle applications, this bearing supports combined radial and axial loads in drivetrain and wheel end positions. The T2E0050 meets OE specifications and is interchangeable with equivalent Fersa and NTN models.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2575 |
| Part Number | T2E0050 |
| Product Type | Tapered Roller Bearing – Single Row, Metric Series |
| Bore Diameter (d) | 50.00 mm (1.969 inch) |
| Outer Diameter (D) | 100.00 mm (3.937 inch) |
| Width (T) | 34.00 mm (1.339 inch) |
| Enclosure | Open |
| Material | High Carbon Chrome Steel (GCr15) |
Note: Dimensional data is based on FOTON parts catalog information. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2575
OE Numbers:
T2E0050
Reference Numbers (Interchange):
Fersa: 529/520X1
NTN: T2E0050
SKF: T2E0050
Vehicle Fitment
FOTON: Various commercial vehicle models (verify OE number and dimensions before ordering)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller design supports combined radial and axial loads – suitable for differential, transmission, and wheel hub applications.
- Metric-series configuration with 50 mm bore and 100 mm outer diameter matches FOTON OE T2E0050 specifications.
- Separable cup and cone construction simplifies installation and maintenance – inner ring with roller assembly can be mounted independently.
- Heat-treated bearing steel with precision-ground raceways ensures consistent load distribution and wear resistance.
- Interchangeable with Fersa 529/520X1 and NTN equivalents – confirmed cross-reference available.
Installation Notes
- Confirm bore diameter (50.00 mm) and outer diameter (100.00 mm) match your existing bearing and housing before installation.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Set bearing preload according to FOTON manufacturer specifications – tapered rollers require proper adjustment for differential and axle operation.
- Lubricate with high-quality gear oil or grease – refer to the FOTON service manual for viscosity grade and lubrication method.
- When paired with a second tapered roller bearing, mount in mirror-image arrangement to accommodate axial loads in both directions.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tapered roller bearings and automotive components to OE specifications. Contact us
