32020X Wheel Bearing For MERCEDES-BENZ
The DUHUI Bearing 32020X is a single-row tapered roller bearing with a 100 mm bore, 150 mm outer diameter, and 32 mm total width. This automotive wheel bearing is designed for Mercedes-Benz commercial vehicle front and rear axle wheel hubs, including Actros, Atego, and Axor models. It matches Mercedes-Benz OE specifications including 001 981 64 05, 001 981 72 05, 004 981 74 05, and 006 981 04 05, and serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable bearing solution.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2457 |
| Part Number | 32020X |
| Product Type | Single Row Tapered Roller Bearing |
| Bore Diameter (d) | 100.00 mm (3.937 inch) |
| Outer Diameter (D) | 150.00 mm (5.906 inch) |
| Cone Width (B) | 32.00 mm (1.260 inch) |
| Cup Width (C) | 24.00 mm (0.945 inch) |
| Total Width (T) | 32.00 mm (1.260 inch) |
| Weight | 1.89 kg (4.17 lb) |
| Bearing Material | High Chromium Bearing Steel |
| Cage Material | Steel Cage |
| Dynamic Load Rating | 173 kN |
| Static Load Rating | 285 kN |
| Limiting Speed (Grease) | 2,200 rpm |
| Limiting Speed (Oil) | 3,000 rpm |
| Temperature Range | -30°C to 120°C |
Note: Dimensional data is based on manufacturer published specifications from SKF, Timken, and FAG catalogs. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2457
OE Numbers:
MERCEDES-BENZ: 001 981 64 05, 001 981 72 05, 004 981 74 05, 006 981 04 05, A 001 981 64 05, A 001 981 72 05, A 004 981 74 05, A 006 981 04 05
Reference Numbers (Interchange):
SKF: VKHB 2306
Timken: SET1050
FAG: 32020X
SNR: HDB019
FEBI BILSTEIN: 29933
DT Spare Parts: 1.16459
Fersa: 32020 XF
MEYLE: 034 751 0000
Vehicle Fitment
MERCEDES-BENZ ACTROS: 1831 AK (1997-2002)
MERCEDES-BENZ ATEGO: 1823 AK (1998-2004)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller bearing design accommodates high radial and axial loads in one direction. The conical raceways allow these bearings to support combined loads effectively.
- Separable cone and cup components simplify mounting, dismounting, and maintenance. The cone unit consists of an inner ring with cage and roller set, while the cup is the outer ring.
- X suffix indicates boundary dimensions altered to conform to ISO standards for improved interchangeability.
- Manufactured to OE specifications with high chromium bearing steel for durability and fatigue resistance.
- Direct interchange with multiple major brand equivalents including SKF VKHB 2306, Timken SET1050, and FAG 32020X.
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm bore diameter (100.00 mm) and outer diameter (150.00 mm) match your housing and shaft before installation.
- This is a single-row tapered roller bearing – these bearings must be mounted in mirror-image arrangement together with a second tapered roller bearing. Paired bearing sets can be applied in X, O, or tandem arrangements.
- Inspect the housing and shaft surfaces for wear or damage before installing new components.
- Apply even pressure when pressing the cone onto the shaft and the cup into the housing – never apply force directly through the rolling elements.
- Proper bearing preload is critical for tapered roller bearings – refer to the Mercedes-Benz service manual for torque specifications.
- Pack the bearing with high-quality grease before installation if not pre-lubricated.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
