6806-2RS Wheel Bearing For MITSUBISHI
The DUHUI Bearing 6806-2RS is a single-row deep groove ball bearing with a 30 mm bore, 42 mm outer diameter, and 7 mm width. This automotive wheel bearing features rubber seals on both sides and is commonly used in wheel hub and light-duty applications. It matches Mitsubishi OE specification 6806-2RS and serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable bearing solution for compact assemblies.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3525 |
| Part Number | 6806-2RS |
| Product Type | Single Row Deep Groove Ball Bearing |
| Bore Diameter (d) | 30.00 mm (1.181 inch) |
| Outer Diameter (D) | 42.00 mm (1.654 inch) |
| Width (B) | 7.00 mm (0.276 inch) |
| Seals | 2RS – Rubber Seals Both Sides |
| Weight | 0.03 kg (0.07 lb) |
| Bearing Material | Chrome Steel |
| Cage Material | Steel Cage |
| Dynamic Load Rating (Cr) | 4.60 kN |
| Static Load Rating (C0r) | 2.55 kN |
| Fatigue Load Limit (Cu) | 0.13 kN |
| Limiting Speed (Grease) | 12,000 rpm |
| Temperature Range | -40°C to 120°C |
Note: Dimensional data is based on manufacturer published specifications from SKF and NTN catalogs. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3525
OE Numbers:
MITSUBISHI: 6806-2RS
Reference Numbers (Interchange):
SKF: 6806-2RS
NTN: 6806-2RS
KOYO: 6806-2RS
Vehicle Fitment
MITSUBISHI: Various passenger car and light-duty applications
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row deep groove ball bearing design supports radial loads and moderate axial loads in both directions. Simple and robust construction requires little maintenance and is suitable for high-speed applications.
- 2RS contact rubber seals on both sides provide excellent protection against dust, moisture, and contaminants while retaining lubricant for the service life of the bearing.
- Compact miniature bearing design – ideal for applications where space is limited, such as small electric motors, power tools, and light-duty automotive components.
- Manufactured to OE specifications with chrome steel rings and balls for durability and fatigue resistance.
- Direct interchange with multiple major brand equivalents including SKF 6806-2RS and NTN 6806-2RS.
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm bore diameter (30.00 mm) and outer diameter (42.00 mm) match your housing and shaft before installation.
- This bearing is sealed on both sides – seals are non-removable and protect against contamination. Do not attempt to remove or disassemble the seals.
- Inspect the housing and shaft surfaces for wear or damage before installing new components.
- Apply even pressure when pressing the bearing into the housing or onto the shaft – never apply force directly through the rolling elements. Do not use a hammer to strike the bearing.
- Bearing is factory-lubricated and sealed – no additional greasing required before installation.
- Install in a clean environment to prevent contamination. Even small particles entering the bearing can shorten its service life.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
