6011-2RS Wheel Bearing For MERCEDES-BENZ
The DUHUI Bearing 6011-2RS is a single-row deep groove ball bearing with a 55 mm bore, 90 mm outer diameter, and 18 mm width. This automotive wheel bearing features contact rubber seals on both sides and is commonly used in Mercedes-Benz front wheel hub and differential applications . It matches Mercedes-Benz OE specification 9816725 and serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable sealed bearing solution .
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3523 |
| Part Number | 6011-2RS |
| Product Type | Single Row Deep Groove Ball Bearing |
| Bore Diameter (d) | 55.00 mm (2.165 inch) |
| Outer Diameter (D) | 90.00 mm (3.543 inch) |
| Width (B) | 18.00 mm (0.709 inch) |
| Seals | 2RS – Rubber Seals Both Sides |
| Weight | 0.40 kg (0.88 lb) |
| Bearing Material | Chrome Steel |
| Cage Material | Steel Cage |
| Dynamic Load Rating (Cr) | 28.1 kN |
| Static Load Rating (C0r) | 21.2 kN |
| Fatigue Load Limit (Cu) | 1.36 kN |
| Limiting Speed (Grease) | 7,300 rpm |
| Temperature Range | -40°C to 120°C |
Note: Dimensional data is based on manufacturer published specifications from FAG, SKF, NTN, and NSK-RHP catalogs . Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3523
OE Numbers:
MERCEDES-BENZ: 9816725
Reference Numbers (Interchange):
SKF: 6011-2RS, 6011-2RS1
FAG: 6011.2RSR
NTN: 6011LLU
NSK-RHP: 6011DDU
KOYO: 6011-2RS
SNR: 6011EE
TRIPLE FIVE: 6011-2RS
Vehicle Fitment
MERCEDES-BENZ: Various passenger car and commercial vehicle applications – front wheel hub and differential assemblies
VOLVO: Selected applications (OE 191808)
RENAULT: Selected applications (OE 7703075129, 7703075007)
PEUGEOT/CITROËN: Selected applications (OE 3350 67)
BMW: Selected applications (OE 11211718257)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row deep groove ball bearing design supports radial loads and moderate axial loads in both directions. Simple and robust construction requires little maintenance and is suitable for high-speed applications .
- 2RS contact rubber seals on both sides provide excellent protection against dust, moisture, and contaminants while retaining lubricant for the service life of the bearing .
- Manufactured to OE specifications with chrome steel rings and balls for durability and fatigue resistance .
- Steel cage provides reliable ball guidance under load .
- Direct interchange with multiple major brand equivalents including SKF 6011-2RS, FAG 6011.2RSR, NTN 6011LLU, and NSK-RHP 6011DDU .
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm bore diameter (55.00 mm) and outer diameter (90.00 mm) match your housing and shaft before installation .
- This bearing is sealed on both sides – seals are non-removable and protect against contamination. Do not attempt to remove or disassemble the seals .
- Inspect the housing and shaft surfaces for wear or damage before installing new components.
- Apply even pressure when pressing the bearing into the housing or onto the shaft – never apply force directly through the rolling elements. Do not use a hammer to strike the bearing.
- Bearing is factory-lubricated and sealed – no additional greasing required before installation .
- Install in a clean environment to prevent contamination. Even small particles entering the bearing can shorten its service life.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
