6015-2RS/C3 Wheel Bearing For MERCEDES-BENZ
The DUHUI Bearing 6015-2RS/C3 is a single-row deep groove ball bearing with a 75 mm bore, 115 mm outer diameter, and 20 mm width. This automotive wheel bearing features contact rubber seals on both sides and C3 internal clearance, designed for Mercedes-Benz MB-Trac tractor front wheel hub applications [citation:5][citation:9]. It matches Mercedes-Benz OE specifications 0029811225 and A0029811225, and serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable sealed bearing solution for agricultural equipment .
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3513 |
| Part Number | 6015-2RS/C3 |
| Product Type | Single Row Deep Groove Ball Bearing |
| Bore Diameter (d) | 75.00 mm (2.953 inch) |
| Outer Diameter (D) | 115.00 mm (4.528 inch) |
| Width (B) | 20.00 mm (0.787 inch) |
| Seals | 2RS – Rubber Seals Both Sides |
| Internal Clearance | C3 – Larger Than Normal |
| Weight | 0.64 – 0.68 kg (1.41 – 1.50 lb) |
| Bearing Material | Bearing Steel |
| Cage Material | Pressed Steel Cage |
| Dynamic Load Rating (Cr) | 39.7 – 42.0 kN |
| Static Load Rating (C0r) | 33.5 kN |
| Limiting Speed (nG) | 3,050 – 3,400 rpm |
| Temperature Range | -20°C to 110°C |
Note: Dimensional data is based on manufacturer published specifications from SKF, FAG, and Timken catalogs . Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3513
OE Numbers:
MERCEDES-BENZ: 0029811225, A0029811225
Reference Numbers (Interchange):
SKF: 6015-2RS1/C3, 6015-2RS C3
FAG: 6015-2RSR
Timken: 6015-2RS-C3
LuK: 500039300
SACHS: 1863858001
Vehicle Fitment
MERCEDES-BENZ MB-TRAC: 65/70 (1973-1991), 700 (1973-1991), 800 (1973-1991)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row deep groove ball bearing design supports radial loads and moderate axial loads in both directions. Simple and robust construction requires little maintenance and is suitable for high-speed applications .
- 2RS contact rubber seals on both sides provide excellent protection against dust, moisture, and contaminants while retaining lubricant for the service life of the bearing .
- C3 internal clearance provides a larger-than-normal clearance to accommodate thermal expansion and higher operating temperatures, reducing the risk of seizure during operation .
- Manufactured to OE specifications with bearing steel rings and balls, and a pressed steel cage for durability and fatigue resistance .
- Factory-lubricated and sealed – maintenance-free design requires no regreasing during service life .
- Direct interchange with multiple major brand equivalents including SKF 6015-2RS1/C3, FAG 6015-2RSR, and Timken 6015-2RS-C3 .
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm bore diameter (75.00 mm) and outer diameter (115.00 mm) match your hub and axle before installation .
- This bearing is sealed on both sides – seals are non-removable and protect against contamination. Do not attempt to remove or disassemble the seals .
- Inspect the hub surface and axle shaft for wear or damage before installing new components.
- Apply even pressure when pressing the bearing into the hub – never apply force directly through the rolling elements. Do not use a hammer to strike the bearing.
- Bearing is factory-lubricated and sealed – no additional greasing required before installation .
- Install in a clean environment to prevent contamination. Even small particles entering the bearing can shorten its service life.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
