BAC355212 Wheel Bearing For MAN
The DUHUI Bearing BAC355212 is a single-row deep groove ball bearing with a 35 mm bore, 52 mm outer diameter, and 12 mm width. This automotive wheel bearing is designed for MAN truck applications and matches MAN OE specification BAC355212. It serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable bearing solution for commercial vehicle wheel hub assemblies .
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3512 |
| Part Number | BAC355212 |
| Product Type | Single Row Deep Groove Ball Bearing |
| Bore Diameter (d) | 35.00 mm (1.378 inch) |
| Outer Diameter (D) | 52.00 mm (2.047 inch) |
| Width (B) | 12.00 mm (0.472 inch) |
| Weight | 0.07 kg (0.15 lb) |
| Bearing Material | High Carbon Chrome Steel (GCr15) |
| Temperature Range | -30°C to 110°C |
Note: Dimensional data is based on manufacturer published specifications from Fersa and PFI catalogs . Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3512
OE Numbers:
MAN: BAC355212
Reference Numbers (Interchange):
Fersa: BAC355212
PFI: PC35520012CS
A&S: 35BD5212
Vehicle Fitment
MAN: Various truck applications – wheel hub assemblies
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row deep groove ball bearing design supports radial loads and moderate axial loads in both directions. Simple and robust construction requires little maintenance and is suitable for high-speed applications.
- Manufactured to OE specifications with high carbon chromium bearing steel (GCr15) for durability and load resistance .
- Direct interchange with multiple major brand equivalents including Fersa BAC355212 and PFI PC35520012CS .
- Optimized for commercial vehicle wheel hub applications where reliability and longevity are critical.
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm bore diameter (35.00 mm) and outer diameter (52.00 mm) match your hub and axle before installation.
- Inspect the hub surface and axle shaft for wear or damage before installing new components.
- Apply even pressure when pressing the bearing into the hub – never apply force directly through the rolling elements. Do not use a hammer to strike the bearing.
- Pack the bearing with high-quality grease before installation if not pre-lubricated.
- Torque all fasteners to MAN service manual specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
