3984/3920 Wheel Bearing For DAF
The DUHUI Bearing 3984/3920 wheel bearing is an inch-series single-row tapered roller bearing with a 66.675 mm bore, 112.712 mm outer diameter, and 30.162 mm total width. Designed for DAF commercial vehicle applications, this bearing supports combined radial and axial loads in wheel hub, axle, and transmission positions. It matches DAF OE specifications including 0174601 and 10890343, with cross-references to Timken SET98, SKF VKHB 2074, and Fersa 3984/3920.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2403 |
| Part Number | 3984/3920 |
| Product Type | Tapered Roller Bearing – Single Row, Inch Series |
| Bore Diameter (d) | 66.68 mm (2.625 inch) |
| Outer Diameter (D) | 112.71 mm (4.438 inch) |
| Total Width (T) | 30.16 mm (1.188 inch) |
| Dynamic Load Rating (Cr) | 132.0 kN (29,670 lbf) |
| Static Load Rating (C0r) | 176.0 kN (39,560 lbf) |
| Material | High Carbon Chrome Steel (GCr15) |
| Weight | 1.15 kg (2.54 lb) |
Note: Dimensional and performance data is based on Timken and SKF published specifications for the 3984/3920 series. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2403
OE Numbers:
0174601, 10890343, 1403631, 1407217, 1407271, 325309
Reference Numbers (Interchange):
Timken: SET98, 3984/3920
SKF: VKHB 2074
Fersa: 3984/3920
FAG: K3984.3920
DT Spare Parts: 7.32528
Vehicle Fitment
DAF 45 FA: 45.120-035 1991-2000
DAF LF 45 FA: 45.130 2001-2006
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller design supports combined radial and axial loads in one direction – suitable for heavy-duty commercial vehicle wheel hub, axle, and transmission applications.
- Inch-series configuration with 66.675 mm bore and 112.712 mm outer diameter matches Timken SET98, SKF VKHB 2074, and Fersa 3984/3920 equivalents for direct replacement.
- Separable cup and cone construction simplifies installation and maintenance – inner ring with roller assembly can be mounted independently.
- Heat-treated bearing steel with precision-ground raceways – rated for 132 kN dynamic load and 176 kN static load for demanding commercial vehicle drivetrains.
- Open-type configuration supports splash lubrication and oil bath systems common in heavy-duty axle and hub applications.
- Cross-referenced with DAF OE 0174601 and 10890343 – confirmed interchange available.
Installation Notes
- Confirm bore diameter (66.675 mm) and outer diameter (112.712 mm) match your existing bearing and housing before installation.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Set bearing preload according to DAF manufacturer specifications – tapered rollers require proper adjustment for axle and wheel hub operation.
- Lubricate with high-quality gear oil or grease – refer to the DAF service manual for viscosity grade and lubrication method.
- When paired with a second tapered roller bearing, mount in mirror-image arrangement to accommodate axial loads in both directions.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tapered roller bearings and automotive components to OE specifications. Contact us
