Oil Seal 9091302067
The DUHUI Oil Seal 90913-02067 is a precision-engineered sealing component designed for Toyota and Mazda applications. This oil seal features dimensions of 5.20 mm inner diameter, 10 mm outer diameter, and 10.80 mm width, constructed from FKM (fluoroelastomer) material in gray-green color, matching OE specification 90913-02067. It is directly interchangeable with OE numbers 90913-02081 and B3C810155.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | 90913-02067 |
| Inside Diameter (ID) | 5.20 mm (0.205 inch) |
| Outside Diameter (OD) | 10.00 mm (0.394 inch) |
| Width | 10.80 mm (0.425 inch) |
| Material | FKM (Fluoroelastomer) |
| Color | Gray-green |
| Product Type | Oil Seal / Shaft Seal |
Note: Dimensional data is based on available sources. This is an oil seal designed for Toyota and Mazda applications. Please verify measurements against your original part before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 90913-02067, 90913-02081, 90913-02119, 30874486, B3C810155
Reference Numbers (Interchange):
TOYOTA: 90913-02067, 90913-02081, 90913-02119
MAZDA: B3C810155, 30874486
SKF: 12934
TIMKEN: 472188
Vehicle Fitment
TOYOTA: CARINA VII Saloon (_T21_) 1.5 (AT212) – 1996-2001
MAZDA: 626 V (GF) 1.9 – 1999-2002
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Precision-engineered oil seal designed for Toyota and Mazda applications
- FKM (fluoroelastomer) material provides excellent resistance to high temperatures, oils, and chemicals
- 5.20 mm inner diameter, 10 mm outer diameter, 10.80 mm width – direct OE replacement
- Direct interchange with OE numbers 90913-02067, 90913-02081, and B3C810155
- Gray-green color for easy identification
- Manufactured to OE specifications for reliable sealing performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the oil seal or packaging
Installation Notes
- Verify dimensions (ID 5.20 mm, OD 10 mm, width 10.80 mm) against your original oil seal
- Confirm fitment for your specific Toyota or Mazda model and application
- Clean the shaft and housing bore thoroughly before installation
- Apply a thin coat of clean oil to the seal lip to prevent dry start damage
- Use a proper seal installer tool to avoid damaging the seal lip during installation
- Ensure the seal is installed with the correct orientation – lip facing the fluid side
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces oil seals and automotive components to OE specifications. Contact us
