Oil Seal 9031135008
The DUHUI Oil Seal 90311-35008 is a precision-engineered sealing component designed for Toyota applications. This oil seal features dimensions of 35 mm inner diameter, 49 mm outer diameter, and 6 mm width, constructed from SIL (silicone) material in brown color, matching OE specification 90311-35008. It is directly interchangeable with OE numbers 13510-01M00 and 90080-31066.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | 90311-35008 |
| Inside Diameter (ID) | 35.00 mm (1.378 inch) |
| Outside Diameter (OD) | 49.00 mm (1.929 inch) |
| Width | 6.00 mm (0.236 inch) |
| Material | SIL (Silicone) |
| Color | Brown |
| Product Type | Oil Seal / Shaft Seal |
Note: Dimensional data is based on available sources. This is an oil seal designed for Toyota applications. Please verify measurements against your original part before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 90311-35008, 13510-01M00, 90080-31066, 90311-32001, 90311-32018
Reference Numbers (Interchange):
TOYOTA: 90311-35008, 13510-01M00, 90080-31066, 90311-32001, 90311-32018
SKF: 12936
TIMKEN: 472190
NATIONAL: 710309
Vehicle Fitment
TOYOTA: AVENSIS Liftback (_T22_) 1.6 i (AT220_, AT220R) – 1997-2000
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Precision-engineered oil seal designed for Toyota applications
- SIL (silicone) material provides excellent resistance to high temperatures and oils
- 35 mm inner diameter, 49 mm outer diameter, 6 mm width – direct OE replacement
- Direct interchange with OE numbers 90311-35008, 13510-01M00, and 90080-31066
- Brown color for easy identification
- Manufactured to OE specifications for reliable sealing performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the oil seal or packaging
Installation Notes
- Verify dimensions (ID 35 mm, OD 49 mm, width 6 mm) against your original oil seal
- Confirm fitment for your specific Toyota model and application
- Clean the shaft and housing bore thoroughly before installation
- Apply a thin coat of clean oil to the seal lip to prevent dry start damage
- Use a proper seal installer tool to avoid damaging the seal lip during installation
- Ensure the seal is installed with the correct orientation – lip facing the fluid side
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces oil seals and automotive components to OE specifications. Contact us
