6206-ZNR Wheel Bearing
The DUHUI Bearing 6206-ZNR is a single-row deep groove ball bearing with a 30 mm bore, 62 mm outer diameter, and 16 mm width. This bearing features a metal shield on one side (Z) with a retaining ring groove (NR) for axial positioning, and is designed for automotive and industrial applications requiring low friction and high-speed capability. It matches OE specification 6206 ZNR and is cross-referenced with SKF, NTN, and NSK equivalents.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3563 |
| Part Number | 6206-ZNR |
| Product Type | Deep Groove Ball Bearing – Single Row |
| Bore Diameter (d) | 30.00 mm (1.181 inch) |
| Outer Diameter (D) | 62.00 mm (2.441 inch) |
| Width (B) | 16.00 mm (0.630 inch) |
| Enclosure | Z – Metal Shield on One Side |
| Retaining Ring Groove | NR – Snap Ring Groove on Outer Ring |
| Material | High Carbon Chrome Steel (GCr15) |
| Weight | 0.20 kg (0.44 lb) |
Note: Dimensional data is based on manufacturer published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3563
OE Numbers:
6206 ZNR
Reference Numbers (Interchange):
SKF: 6206-ZNR
NTN: 6206ZNR
NSK: 6206ZNR
Vehicle Fitment
This bearing is used in various automotive and industrial applications. Please verify OE number and dimensions before ordering.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Deep groove ball design accommodates radial loads and moderate axial loads in both directions – suitable for automotive and industrial applications.
- Metal shield on one side (Z) provides effective contamination protection while minimizing friction – retains lubricant and excludes dirt.
- NR retaining ring groove on the outer ring allows for snap ring installation – ensures axial positioning within the housing.
- Metric configuration with 30 mm bore and 62 mm outer diameter matches OE 6206-ZNR for direct replacement.
- Heat-treated GCr15 bearing steel with precision-ground raceways – low friction coefficient and high limiting speed.
Installation Notes
- Confirm bore diameter (30.00 mm) and outer diameter (62.00 mm) match your housing and shaft before installation.
- This bearing features a metal shield on one side – ensure the shield side is correctly oriented during installation.
- The NR retaining ring groove is designed for snap ring positioning – if using a snap ring, verify the groove diameter matches your housing design.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Press the bearing squarely into the housing or onto the shaft – never apply force directly through the rolling elements.
- Torque all fasteners to vehicle manufacturer specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces deep groove ball bearings and automotive components to OE specifications. Contact us
