513287 Wheel Hub Bearing For TOYOTA
The DUHUI 513287 is a complete wheel hub bearing assembly designed for Toyota Prius models from 2008 onward. This hub assembly features a flange diameter of 127.00 mm (5.000 inch), 5 wheel studs (M12 x 1.5), and 26 splines, matching OE specification 513287. It is directly interchangeable with Timken, SKF, and Moog for reliable performance.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1474 |
| Part Number | 513287 |
| Flange Diameter | 127.00 mm (5.000 inch) |
| Flange Offset | 50.80 mm (2.000 inch) |
| Flange Bolt Hole Quantity | 4 |
| Flange Bolt Hole Diameter | M10 x 1.25 |
| Bolt Circle Diameter | 101.60 mm (4.000 inch) |
| Brake Pilot Diameter | 83.82 mm (3.300 inch) |
| Wheel Pilot Diameter | 55.88 mm (2.200 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Mounting Hole Quantity | 4 |
| Spline Quantity | 26 |
| Material | Steel |
Note: Dimensional data is based on available sources. This is a wheel hub bearing assembly designed for Toyota Prius applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1474
OE Numbers: 513287
Reference Numbers (Interchange):
Timken: 513287
SKF: BR930634
Moog: 513287
National: 513287
Vehicle Fitment
TOYOTA: PRIUS Hatchback (ZVW30) – 2008 onward, PRIUS BASE MODEL L4 1.8L (2ZR-FXE) – 2010-2012, PRIUS PLUG-IN L4 1.8L (2ZR-FXE) – 2012
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete wheel hub bearing assembly designed for Toyota Prius applications
- 127 mm flange diameter with 5-stud M12 x 1.5 wheel stud configuration
- 26-spline design for precise axle engagement and torque transfer
- Pre-assembled hub design eliminates the need for a shop press during installation
- Pre-loaded bearing with factory-set preload for consistent performance
- Multi-lip seal design provides contamination protection and retains lubricant
- Direct interchange with Timken 513287 and SKF BR930634
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify dimensions against your original part before installation
- Confirm fitment for your specific Toyota Prius model (ZVW30, 2008 onward)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new assembly
- Torque the axle nut and mounting bolts to Toyota service manual specifications
- After installation, verify smooth wheel rotation without noise or binding
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
