609-2Z/C3 Wheel Bearing
The DUHUI Bearing 609-2Z/C3 is a single-row deep groove ball bearing with a 9 mm bore, 24 mm outer diameter, and 7 mm width. This miniature automotive wheel bearing features metal shields on both sides and C3 internal clearance, matching OE specification 609-2Z/C3. It serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable bearing solution for compact applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3506 |
| Part Number | 609-2Z/C3 |
| Product Type | Single Row Deep Groove Ball Bearing |
| Bore Diameter (d) | 9.00 mm (0.354 inch) |
| Outer Diameter (D) | 24.00 mm (0.945 inch) |
| Width (B) | 7.00 mm (0.276 inch) |
| Weight | 0.015 kg (15 g) |
| Seals | 2Z – Metal Shields Both Sides |
| Internal Clearance | C3 – Larger Than Normal |
| Bearing Material | Chrome Steel |
| Cage Material | Steel Cage |
| Dynamic Load Rating | 3.90 kN |
| Static Load Rating | 1.66 kN |
| Limiting Speed | 34,000 rpm |
| Temperature Range | -30°C to 120°C |
Note: Dimensional data is based on manufacturer published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3506
OE Numbers:
609-2Z/C3
Reference Numbers (Interchange):
SKF: 609-2Z/C3, 609-2Z/C3LHT23, 609ZZ C3
Vehicle Fitment
Please verify OE number, dimensions and vehicle configuration before ordering. Fitment data is not available for this part number.
Product Features
- Single-row deep groove ball bearing design supports radial loads and moderate axial loads in both directions. Simple and robust construction requires little maintenance.
- 2Z metal shields on both sides prevent ingress of dirt and contaminants while maintaining low friction for high running speeds.
- C3 internal clearance accommodates thermal expansion and reduces the risk of seizure during operation, particularly in high-speed applications.
- Manufactured to OE specifications with chrome steel rings, balls, and a steel cage for durability and fatigue resistance.
- Compact miniature bearing design – ideal for applications where space is limited, such as small electric motors, power tools, and automotive components like alternators and cooling fans.
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm bore diameter (9.00 mm) and outer diameter (24.00 mm) match your housing and shaft before installation.
- This bearing is shielded with metal covers on both sides – the shields are not removable and protect against contamination.
- Inspect the housing and shaft surfaces for wear or damage before installing new components.
- Apply even pressure when pressing the bearing into the housing or onto the shaft – never apply force directly through the rolling elements.
- Bearing is factory-lubricated and sealed – no additional greasing required before installation.
- For applications requiring higher temperature operation, verify the temperature range (-30°C to 120°C) meets your requirements.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
