6306-2LS2/C5 Wheel Bearing For RENAULT TRUCKS
The DUHUI Bearing 6306-2LS2/C5 deep groove ball bearing is an OE-replacement solution for Renault Trucks Kerax models and other heavy-duty commercial vehicle applications. This single-row bearing features contact seals on both sides (2LS2) for enhanced contamination protection in demanding environments, and a C5 internal clearance rating for elevated operating temperatures. Manufactured to match original equipment specifications including RENAULT TRUCKS 7420512915, this bearing is also interchangeable with SKF 6306-2LS2/C5/246560 AA.
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DWB3503 | |
| Part Number | 6306-2LS2/C5 | |
| Product Type | Deep Groove Ball Bearing | |
| Row Type | Single Row | |
| Bore Diameter (d) | 30.00 mm | 1.181 in |
| Outside Diameter (D) | 72.00 mm | 2.835 in |
| Width (B) | 19.00 mm | 0.748 in |
| Seal Type | 2LS2 (Double Contact Seal) | |
| Internal Clearance | C5 | |
| Dynamic Load Rating (Cr) | 29,600 N | |
| Static Load Rating (C0r) | 16,000 N | |
| Limiting Speed – Grease | 13,000 rpm | |
| Weight | 0.35 kg | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3503
OE Numbers:
7420512915
Reference Numbers (Interchange):
SKF: 6306-2LS2/C5/246560 AA, 6306-2RS1/C5
SNR: 6306EE
SACHS: 1863869037
KLAXCAR FRANCE: 22011z
NTN: 6306LLU/5K
FAG: 6306.2RSR.C5
Vehicle Fitment
RENAULT TRUCKS KERAX 460.32: 05/2006-2013
RENAULT TRUCKS KERAX 500.32: 05/2006-2013
Additional compatible models (verify before ordering):
RENAULT TRUCKS KERAX: 430.32 (2006-2013), 440.32 (2006-2013), 300.26 (1997-2003), 385 6×6
Engine Compatibility: DXi 11 (10.8L), 299-500 hp
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Deep groove ball bearing design accommodates both radial and moderate axial loads in either direction.
- 2LS2 contact seals on both sides provide excellent contamination protection and grease retention for harsh environments.
- C5 internal clearance rating accommodates thermal expansion in high-temperature commercial vehicle applications.
- Pre-lubricated and sealed design reduces maintenance requirements.
- Manufactured from high-carbon chromium bearing steel for durability under heavy loads.
- Interchangeable with major brands including SKF, SNR, and NTN.
Installation Notes
- Confirm bore diameter is 30.00 mm (1.181 in), outside diameter is 72.00 mm (2.835 in), and width is 19.00 mm (0.748 in) before installation.
- This bearing is pre-lubricated and sealed – do not wash out the grease or remove the seals.
- Press the bearing onto the shaft or into the housing using appropriate tools – never strike with a hammer.
- Apply force only to the ring being fitted (inner ring for shaft mounting, outer ring for housing mounting).
- Inspect the shaft and housing surfaces for damage or wear before installing new components.
- Refer to the Renault Trucks service manual for specific torque values and installation procedures.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive and industrial bearing supplier established in Zhejiang, China, in 2003. DUHUI produces deep groove ball bearings and automotive components to OE specifications. Contact us
