63/32 C3 Wheel Bearing For HONDA
The DUHUI Bearing 63/32 C3 is a single-row deep groove ball bearing with a 32 mm bore, 75 mm outer diameter, and 20 mm width. This automotive wheel bearing features C3 internal clearance for thermal expansion accommodation and is designed for Honda vehicle applications. It matches OE specifications including 63/32 C3 and serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable bearing solution for wheel hubs, transmissions, and industrial applications where increased internal clearance is required.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2495 |
| Part Number | 63/32 C3 |
| Product Type | Single Row Deep Groove Ball Bearing |
| Bore Diameter (d) | 32.00 mm (1.260 inch) |
| Outer Diameter (D) | 75.00 mm (2.953 inch) |
| Width (B) | 20.00 mm (0.787 inch) |
| Internal Clearance | C3 – Larger Than Normal |
| Weight | 0.39 kg (0.86 lb) |
| Bearing Material | Standard Bearing Steel |
| Cage Material | Pressed Steel Cage |
| Dynamic Load Rating | 33.0 kN |
| Static Load Rating | 17.0 kN |
| Limiting Speed (Grease) | 9,000 rpm |
| Limiting Speed (Oil) | 11,000 rpm |
| Temperature Range | -20°C to 120°C |
Note: Dimensional data is based on manufacturer published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2495
OE Numbers:
63/32 C3
Reference Numbers (Interchange):
NSK: 63/32 C3
NTN: 63/32 C3
SKF: 63/32 C3
Vehicle Fitment
HONDA: Various Honda passenger car and SUV applications
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row deep groove ball bearing design supports radial loads and moderate axial loads in both directions. Simple and robust construction requires little maintenance and is suitable for high-speed applications.
- C3 internal clearance provides a larger-than-normal clearance to accommodate thermal expansion and higher operating temperatures, reducing the risk of seizure during operation.
- Optimized for low noise and low vibration, enabling high rotational speeds.
- Manufactured to OE specifications with standard bearing steel rings and balls, and a pressed steel cage for durability and fatigue resistance.
- Open design allows for easy lubrication and maintenance.
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm bore diameter (32.00 mm) and outer diameter (75.00 mm) match your housing and shaft before installation.
- This is an open bearing – pack with high-quality grease before installation if not pre-lubricated.
- Inspect the housing and shaft surfaces for wear or damage before installing new components.
- Apply even pressure when pressing the bearing into the housing or onto the shaft – never apply force directly through the rolling elements. Do not use a hammer to strike the bearing.
- Install in a clean environment to prevent contamination. Even small particles entering the bearing can shorten its service life.
- Refer to the Honda service manual for torque specifications and installation procedures specific to your vehicle model.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
