14585/25 Wheel Bearing For KIA
The DUHUI Bearing 14585/25 is a single-row tapered roller bearing with a 34.93 mm inner diameter, 68.26 mm outer diameter, and 20.64 mm total width. This automotive wheel bearing is specifically used as a rear wheel inner bearing on Kia Besta, Carnival, Pregio, and Sedona models. It serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable bearing solution for these Kia applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2496 |
| Part Number | 14585/25 |
| Product Type | Single Row Tapered Roller Bearing |
| Bore Diameter (d) | 34.93 mm (1.375 inch) |
| Outer Diameter (D) | 68.26 mm (2.688 inch) |
| Cone Width (B) | 20.64 mm (0.813 inch) |
| Cup Width (C) | 15.88 mm (0.625 inch) |
| Total Width (T) | 20.64 mm (0.813 inch) |
| Weight | 0.32 kg (0.71 lb) |
| Bearing Material | Chrome Steel |
| Dynamic Radial Load | 59.2 kN |
| Static Radial Load | 68.1 kN |
| Temperature Range | -30°C to 110°C |
Note: Dimensional data is based on manufacturer published specifications from Timken, RICH, and PFI catalogs. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2496
OE Numbers:
KIA: K72A-33-047, 0K72A-33047, 04HECBB
Reference Numbers (Interchange):
Timken: 14585-14525, 14585/25
PFI: 14585/25
RICH: 14585/25
NTN: 4T-14585/25
FAG: 713626100
SKF: BR14585/525
Vehicle Fitment
KIA BESTA: GS (1996-2005)
KIA CARNIVAL / SEDONA: (1999-2006)
KIA PREGIO: (1996-2005)
NAZA RIA: (1999-2006)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller bearing design accommodates high radial and axial loads in one direction. The conical raceways allow these versatile bearings to support combined loads effectively.
- Separable cone and cup components simplify mounting, dismounting, and maintenance. The cone unit consists of an inner ring with cage and roller set, while the cup is the outer ring.
- Manufactured to OE specifications with chrome steel rings and rollers for durability and fatigue resistance.
- Direct interchange with multiple major brand equivalents including Timken 14585-14525, NTN 4T-14585/25, and PFI 14585/25.
- Specifically designed for Kia rear wheel inner bearing applications.
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm bore diameter (34.93 mm) and outer diameter (68.26 mm) match your housing and shaft before installation.
- This is a single-row tapered roller bearing – these bearings must be mounted in mirror-image arrangement together with a second tapered roller bearing to accommodate axial loads in both directions.
- Inspect the housing and shaft surfaces for wear or damage before installing new components.
- Apply even pressure when pressing the cone onto the shaft and the cup into the housing – never apply force directly through the rolling elements.
- Proper bearing preload is critical for tapered roller bearings – refer to the Kia service manual for torque specifications.
- Pack the bearing with high-quality grease before installation if not pre-lubricated.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
