32026XQ Wheel Bearing
The DUHUI Bearing 32026XQ wheel bearing is a metric-series single-row tapered roller bearing with a 130 mm bore, 200 mm outer diameter, and 45 mm total width. Designed for heavy-duty automotive and industrial applications, this bearing supports combined radial and axial loads in transmissions, differentials, and wheel hub positions. It matches OE specification 32026XQ and is interchangeable with SKF, FAG, and Timken equivalents.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2422 |
| Part Number | 32026XQ |
| Product Type | Tapered Roller Bearing – Single Row, Metric Series |
| Bore Diameter (d) | 130.00 mm (5.118 inch) |
| Outer Diameter (D) | 200.00 mm (7.874 inch) |
| Total Width (T) | 45.00 mm (1.772 inch) |
| Material | High Carbon Chrome Steel (GCr15) |
Note: Dimensional data is based on manufacturer published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2422
OE Numbers:
32026XQ
Reference Numbers (Interchange):
SKF: 32026XQ
FAG: 32026XQ
Timken: 32026XQ
Vehicle Fitment
This tapered roller bearing is used in heavy-duty automotive transmissions, differentials, and wheel hub applications. Please verify fitment with your original part before ordering.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller design supports combined radial and axial loads in one direction – suitable for heavy-duty automotive and industrial drivetrain applications.
- Metric-series configuration with 130 mm bore and 200 mm outer diameter matches SKF 32026XQ, FAG 32026XQ, and Timken 32026XQ equivalents for direct replacement.
- Separable cup and cone construction simplifies installation and maintenance – inner ring with roller assembly can be mounted independently.
- Heat-treated GCr15 bearing steel with precision-ground raceways ensures consistent load distribution and wear resistance in demanding applications.
- Open-type configuration supports splash lubrication and oil bath systems common in heavy-duty axle and transmission applications.
Installation Notes
- Confirm bore diameter (130.00 mm) and outer diameter (200.00 mm) match your existing bearing and housing before installation.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Set bearing preload according to vehicle or equipment manufacturer specifications – tapered rollers require proper adjustment for drivetrain operation.
- Lubricate with high-quality gear oil or grease – refer to the service manual for viscosity grade and lubrication method.
- When paired with a second tapered roller bearing, mount in mirror-image arrangement to accommodate axial loads in both directions.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tapered roller bearings and automotive components to OE specifications. Contact us
