32219J2 Wheel Bearing For IVECO BENZ
The DUHUI Bearing 32219J2 wheel bearing is a metric-series single-row tapered roller bearing with a 95 mm bore, 170 mm outer diameter, and 47 mm total width. Designed for heavy-duty commercial vehicle applications, this bearing supports combined radial and axial loads in wheel hub, axle, and transmission positions. It matches OE specifications including IVECO 1905350 and MERCEDES-BENZ 0009812105, with cross-references to SKF 32219J2, Timken 32219, and FAG 32219A.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2421 |
| Part Number | 32219J2 |
| Product Type | Tapered Roller Bearing – Single Row, Metric Series |
| Bore Diameter (d) | 95.00 mm (3.740 inch) |
| Outer Diameter (D) | 170.00 mm (6.693 inch) |
| Total Width (T) | 47.00 mm (1.850 inch) |
| Dynamic Load Rating (Cr) | 290.0 kN (65,200 lbf) |
| Static Load Rating (C0r) | 405.0 kN (91,050 lbf) |
| Grease Limit Speed | 1,900 rpm |
| Oil Limit Speed | 2,600 rpm |
| Material | High Carbon Chrome Steel (GCr15) |
| Weight | 4.50 kg (9.92 lb) |
Note: Dimensional and performance data is based on SKF and Timken published specifications for the 32219J2 series. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2421
OE Numbers:
0264059500, 0264102800, 1905350, 7178987, 06324901800, 06324990009, 06324990203, 87523301400, A0023432219, 0009812105, A0009812105, 04200002600, 4200002600, 181086
Reference Numbers (Interchange):
SKF: 32219J2, VKHB2031
FAG: 32219A, 32219DY
Timken: 32219, SET1068
NTN: 32219U, 4T32219
Koyo: 32219JR
SNR: 32219A, HDB090
FEBI BILSTEIN: 19785
Vehicle Fitment
IVECO EUROSTAR LD: 190 E 38 P 1993-2002
MERCEDES-BENZ O 317: 1966-1976
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller design supports combined radial and axial loads in one direction – suitable for heavy-duty commercial vehicle wheel hub, axle, and transmission applications.
- Metric-series configuration with 95 mm bore and 170 mm outer diameter matches SKF 32219J2, FAG 32219A, and Timken 32219 equivalents for direct replacement.
- Separable cup and cone construction simplifies installation and maintenance – inner ring with roller assembly can be mounted independently.
- Heat-treated bearing steel with precision-ground raceways – rated for 290 kN dynamic load and 405 kN static load for demanding commercial vehicle drivetrains.
- Open-type configuration supports splash lubrication and oil bath systems common in heavy-duty axle and hub applications.
- Cross-referenced with IVECO 1905350 and MERCEDES-BENZ 0009812105 – confirmed OE interchange available.
Installation Notes
- Confirm bore diameter (95.00 mm) and outer diameter (170.00 mm) match your existing bearing and housing before installation.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Set bearing preload according to vehicle manufacturer specifications – tapered rollers require proper adjustment for axle and wheel hub operation.
- Lubricate with high-quality gear oil or grease – refer to the Iveco or Mercedes-Benz service manual for viscosity grade and lubrication method.
- When paired with a second tapered roller bearing, mount in mirror-image arrangement to accommodate axial loads in both directions.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tapered roller bearings and automotive components to OE specifications. Contact us
