32218J2 Wheel Bearing For IVECO
The DUHUI Bearing 32218J2 wheel bearing is a metric-series single-row tapered roller bearing with a 90 mm bore, 160 mm outer diameter, and 42.5 mm total width. Designed for heavy-duty commercial vehicle applications, this bearing supports combined radial and axial loads in wheel hub, axle, and transmission positions. It matches OE specifications including IVECO 1905353 and MERCEDES-BENZ N000720032218, with cross-references to SKF VKHB2030, Timken 32218, and FAG 32218A.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2420 |
| Part Number | 32218J2 |
| Product Type | Tapered Roller Bearing – Single Row, Metric Series |
| Fitting Position | Outer Position |
| Bore Diameter (d) | 90.00 mm (3.543 inch) |
| Outer Diameter (D) | 160.00 mm (6.299 inch) |
| Total Width (T) | 42.50 mm (1.673 inch) |
| Dynamic Load Rating (Cr) | 270.0 kN (60,700 lbf) |
| Static Load Rating (C0r) | 365.0 kN (82,050 lbf) |
| Grease Limit Speed | 2,000 rpm |
| Oil Limit Speed | 2,800 rpm |
| Material | High Carbon Chrome Steel (GCr15) |
| Weight | 3.38 kg (7.45 lb) |
Note: Dimensional and performance data is based on SKF and Timken published specifications for the 32218J2 series. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2420
OE Numbers:
410707, 6387762, 99041057, 94060944, 1098120790, 1098121960, 9000931150, 00564707, 01905353, 1905353, 26800240, 3612949000, 564707, 06.32499.0008, 000720032218, N000720032218, 0345245000, 3832590010, 0023432218, 0959232218, 0959532218, 5000021842, 4200002700, 14835, EN3612949, 6691161000, 324717045000, 19468
Reference Numbers (Interchange):
SKF: VKHB2030, VKHB2410S
FAG: 32218A
Timken: 32218, SET1067
Koyo: 32218J2
NTN: 32218, 32218J2
FEBI BILSTEIN: 19784
Vehicle Fitment
IVECO EUROSTAR LD: 190 E 52 1993-2002
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller design supports combined radial and axial loads in one direction – suitable for heavy-duty commercial vehicle wheel hub, axle, and transmission applications.
- Metric-series configuration with 90 mm bore and 160 mm outer diameter matches SKF VKHB2030, Timken 32218, and FAG 32218A equivalents for direct replacement.
- Separable cup and cone construction simplifies installation and maintenance – inner ring with roller assembly can be mounted independently.
- Heat-treated bearing steel with precision-ground raceways – rated for 270 kN dynamic load and 365 kN static load for demanding commercial vehicle drivetrains.
- Open-type configuration supports splash lubrication and oil bath systems common in heavy-duty axle and hub applications.
- Cross-referenced with IVECO 1905353 and multiple commercial vehicle OE numbers – confirmed interchange available.
Installation Notes
- Confirm bore diameter (90.00 mm) and outer diameter (160.00 mm) match your existing bearing and housing before installation.
- This bearing is designed for outer position fitment on Iveco and compatible commercial vehicles – confirm placement before ordering.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Set bearing preload according to vehicle manufacturer specifications – tapered rollers require proper adjustment for axle and wheel hub operation.
- Lubricate with high-quality gear oil or grease – refer to the Iveco service manual for viscosity grade and lubrication method.
- When paired with a second tapered roller bearing, mount in mirror-image arrangement to accommodate axial loads in both directions.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tapered roller bearings and automotive components to OE specifications. Contact us
