29586/22 Wheel Bearing For ISUZU
The DUHUI Bearing 29586/22 wheel bearing is an inch-series single-row tapered roller bearing designed for heavy-duty commercial vehicle rear axle applications. With a 63.5 mm bore, 107.95 mm outer diameter, and 25.4 mm total width, this bearing supports combined radial and axial loads in wheel hub and axle positions. It matches OE specification 29586/22 and is cross-referenced with Timken SET705, Fersa 29586/29522, and A&S equivalents, with confirmed fitment for Isuzu and Hino commercial vehicles.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2389 |
| Part Number | 29586/22 |
| Product Type | Tapered Roller Bearing – Single Row, Inch Series |
| Bore Diameter (d) | 63.50 mm (2.500 inch) |
| Outer Diameter (D) | 107.95 mm (4.250 inch) |
| Total Width (T) | 25.40 mm (1.000 inch) |
| Material | High Carbon Chrome Steel |
| Weight | 0.97 kg (2.15 lb) |
Note: Dimensional data is based on PFI and Timken published specifications for the 29586/22 series. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2389
OE Numbers:
29586/22
Reference Numbers (Interchange):
Timken: SET705
Fersa: 29586/29522
A&S: 29586/22
PFI: 29586/22
Vehicle Fitment
This bearing is used in rear axle applications for the following vehicles:
ISUZU: Various commercial vehicle models (verify OE number and dimensions before ordering)
HINO FA14: 1989-1991 – Rear Axle, Wheel Position
HINO FA1415: 1993-1997 – Rear Axle, Wheel Position
HINO FA15: 1992- – Rear Axle, Wheel Position
HINO FB14: 1987-1991 – Rear Axle, Wheel Position
HINO FB1715: 1993-1997 – Rear Axle, Wheel Position
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller design supports combined radial and axial loads in one direction – suitable for heavy-duty commercial vehicle rear axle and wheel hub applications.
- Inch-series configuration with 63.5 mm bore and 107.95 mm outer diameter matches Timken SET705 and Fersa 29586/29522 equivalents for direct replacement.
- Separable cup and cone construction simplifies installation and maintenance – inner ring with roller assembly can be mounted independently.
- Heat-treated bearing steel with precision-ground raceways – designed to handle the high loads and torque demands of heavy-duty commercial vehicle drivetrains.
- Open-type configuration supports splash lubrication and oil bath systems common in heavy-duty axle and hub applications.
- Cross-referenced with multiple aftermarket brands including Timken and Fersa – confirmed interchange available.
Installation Notes
- Confirm bore diameter (63.50 mm) and outer diameter (107.95 mm) match your existing bearing and housing before installation.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Set bearing preload according to vehicle manufacturer specifications – tapered rollers require proper adjustment for axle and wheel hub operation.
- When paired with a second tapered roller bearing, mount in mirror-image arrangement to accommodate axial loads in both directions.
- Lubricate with high-quality gear oil or grease – refer to the vehicle service manual for viscosity grade and lubrication method.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tapered roller bearings and automotive components to OE specifications. Contact us
