88107-2RS Wheel Bearing For FORD CHEVROLET GMC
The DUHUI Bearing 88107-2RS is a single-row deep groove ball bearing with a 35 mm bore, 72 mm outer diameter, and 17 mm width. This sealed bearing features contact seals on both sides for effective contamination protection, and is designed for automotive applications requiring low friction and high-speed capability. It matches OE specification 88107-2RS and is cross-referenced with SKF, NTN, and NSK equivalents, with confirmed fitment for Ford, Chevrolet, and GMC light truck models.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2372 |
| Part Number | 88107-2RS |
| Product Type | Deep Groove Ball Bearing – Sealed, Single Row |
| Bore Diameter (d) | 35.00 mm (1.378 inch) |
| Outer Diameter (D) | 72.00 mm (2.835 inch) |
| Width (B) | 17.00 mm (0.669 inch) |
| Enclosure | 2RS – Rubber Seals on Both Sides |
| Material | High Carbon Chrome Steel (GCr15) |
Note: Dimensional data is based on manufacturer published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2372
OE Numbers:
88107-2RS
Reference Numbers (Interchange):
SKF: 88107-2RS
NTN: 88107LLU
NSK: 88107DDU
Vehicle Fitment
FORD E-250: 2002-2003
CHEVROLET SILVERADO 1500: 2002-2006
GMC JIMMY: 2002-2005
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Deep groove ball design accommodates radial loads and moderate axial loads in both directions – suitable for automotive wheel hub and drivetrain applications.
- 2RS contact seals on both sides provide effective contamination protection – retains lubricant and excludes dirt and moisture.
- Metric configuration with 35 mm bore and 72 mm outer diameter matches OE 88107-2RS for direct replacement.
- Heat-treated GCr15 bearing steel with precision-ground raceways – low friction coefficient and high limiting speed.
- Factory pre-lubricated – no additional greasing required before installation.
- Cross-referenced with Ford, Chevrolet, and GMC OE numbers – confirmed interchange available.
Installation Notes
- Confirm bore diameter (35.00 mm) and outer diameter (72.00 mm) match your housing and shaft before installation.
- This is a sealed bearing – do not wash or re-lubricate before installation as the factory-fill grease is pre-installed.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Press the bearing squarely into the housing or onto the shaft – never apply force directly through the rolling elements.
- Torque all fasteners to vehicle manufacturer specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces deep groove ball bearings and automotive components to OE specifications. Contact us
