TR111003 Wheel Bearing
The DUHUI Bearing TR111003 wheel bearing is a metric-series single-row tapered roller bearing with a 55 mm bore, 100 mm outer diameter, and 32 mm total width. Designed for automotive and industrial drivetrain applications, this bearing supports combined radial and axial loads in transmissions, differentials, and wheel hub positions. It matches OE specification TR111003 and is cross-referenced with SKF, FAG, and NTN equivalents.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2374 |
| Part Number | TR111003 |
| Product Type | Tapered Roller Bearing – Single Row, Metric Series |
| Bore Diameter (d) | 55.00 mm (2.165 inch) |
| Outer Diameter (D) | 100.00 mm (3.937 inch) |
| Total Width (T) | 32.00 mm (1.260 inch) |
| Material | High Carbon Chrome Steel (GCr15) |
Note: Dimensional data is based on manufacturer published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2374
OE Numbers:
TR111003
Reference Numbers (Interchange):
SKF: TR111003
FAG: TR111003
NTN: TR111003
Vehicle Fitment
This bearing is used in automotive drivetrain applications including transmissions, differentials, and wheel hub assemblies. Please verify fitment with your original part before ordering.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller design supports combined radial and axial loads in one direction – suitable for automotive transmission, differential, and wheel hub applications.
- Metric-series configuration with 55 mm bore and 100 mm outer diameter matches OE TR111003 for direct replacement.
- Separable cup and cone construction simplifies installation and maintenance – inner ring with roller assembly can be mounted independently.
- Heat-treated GCr15 bearing steel with precision-ground raceways ensures consistent load distribution and wear resistance.
- Open-type configuration supports splash lubrication and oil bath systems common in drivetrain applications.
Installation Notes
- Confirm bore diameter (55.00 mm) and outer diameter (100.00 mm) match your existing bearing and housing before installation.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Set bearing preload according to vehicle manufacturer specifications – tapered rollers require proper adjustment for drivetrain and wheel hub operation.
- Lubricate with high-quality gear oil or grease – refer to the vehicle service manual for viscosity grade and lubrication method.
- When paired with a second tapered roller bearing, mount in mirror-image arrangement to accommodate axial loads in both directions.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tapered roller bearings and automotive components to OE specifications. Contact us
