4322626AA0 Wheel Bearing For KIA
The DUHUI Bearing 4322626AA0 is a single-row ball bearing designed for transmission shaft applications on Kia and Hyundai vehicles. This automotive bearing features an inner diameter of 26.8 mm, outer diameter of 58 mm, and inner ring width of 16.2 mm, with a tapered design for gearbox use . It matches Kia OE specification 4322626AA0 and serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable transmission bearing solution.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3533 |
| Part Number | 4322626AA0 (43226-26AA0) |
| Product Type | Single Row Ball Bearing – Transmission Shaft Bearing |
| Inner Diameter (d) | 26.80 mm (1.055 inch) |
| Outer Diameter (D) | 58.00 mm (2.283 inch) |
| Inner Ring Width | 16.20 mm (0.638 inch) |
| Outer Ring Width | 14.00 mm (0.551 inch) |
| Weight | 0.15 kg (0.33 lb) |
| Bearing Material | Case Carburized Steel |
| Cage Material | Fiberglass-Reinforced Polyamide |
| Temperature Range | -30°C to 120°C |
Note: Dimensional data is based on manufacturer published specifications from NACHI and Hyundai/Kia OE catalogs . This is a transmission shaft bearing with a tapered design. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3533
OE Numbers:
KIA: 4322626AA0
HYUNDAI: 43226-26AA0, 026BX5814
Reference Numbers (Interchange):
NACHI: 026BX5814
MOBIS: 4322626AA0
Vehicle Fitment
KIA: K2 (2016-2020), Rio (2016-), Ceed (2015-), Forte/Cerato, Sportage, Optima, Sorento, Picanto, Soul
HYUNDAI: Solaris (2014-), Creta (2016-), i10, i20, i30, Accent, Elantra, Tucson/ix35, Veloster
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Designed specifically for transmission shaft applications – supports gear shaft alignment and maintains proper gear mesh for smooth shifting.
- Precision-engineered to OE specifications with hardened steel races for durability and wear resistance.
- Fiberglass-reinforced polyamide cage provides lightweight, reliable ball guidance under load.
- OEM-grade construction – matches original equipment quality and fitment standards.
- Direct interchange with Hyundai/Kia OE numbers 43226-26AA0 and NACHI 026BX5814.
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm inner diameter (26.80 mm) and outer diameter (58.00 mm) match your transmission shaft and housing before installation.
- This is a transmission shaft bearing – install with correct preload and endplay settings as specified in the vehicle service manual.
- Press only on the race being fitted – never apply force directly through the rolling elements. Do not use a hammer.
- Inspect the shaft and housing surfaces for wear or damage before installing new components.
- Replace transmission seals simultaneously to prevent contamination and lubricant leakage.
- Use the correct transmission fluid type and fill level as specified by the manufacturer.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
