60/322RSC3 Wheel Bearing For Toyota
The DUHUI Bearing 60/322RSC3 is a single-row deep groove ball bearing with a 22 mm bore, 60 mm outer diameter, and 18 mm width. This automotive wheel bearing features rubber seals on both sides and C3 internal clearance, and is designed for Toyota Hilux front wheel hub applications . It matches Toyota OE specification 60/322RSC3 and serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable sealed bearing solution for light-duty commercial vehicles .
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3561 |
| Part Number | 60/322RSC3 |
| Product Type | Single Row Deep Groove Ball Bearing |
| Bore Diameter (d) | 22.00 mm (0.866 inch) |
| Outer Diameter (D) | 60.00 mm (2.362 inch) |
| Width (B) | 18.00 mm (0.709 inch) |
| Seals | 2RS – Rubber Seals Both Sides |
| Internal Clearance | C3 – Larger Than Normal |
| Weight | 0.22 kg (0.49 lb) |
| Bearing Material | Chrome Steel |
| Cage Material | Steel Cage |
| Dynamic Load Rating (Cr) | 19.5 kN |
| Static Load Rating (C0r) | 11.0 kN |
| Temperature Range | -30°C to 120°C |
Note: Dimensional data is based on manufacturer published specifications from KOYO (JTEKT) and Toyota OE catalogs . Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3561
OE Numbers:
TOYOTA: 60/322RSC3
Reference Numbers (Interchange):
KOYO: 60/322RSC3, 90131-50123
NTN: 60/322RSC3
SKF: 60/322RSC3
Vehicle Fitment
TOYOTA HILUX: Front wheel hub applications
TOYOTA 4RUNNER: Front wheel hub applications
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row deep groove ball bearing design supports radial loads and moderate axial loads in both directions. Simple and robust construction requires little maintenance and is suitable for high-speed applications .
- 2RS contact rubber seals on both sides provide excellent protection against dust, moisture, and contaminants while retaining lubricant for the service life of the bearing .
- C3 internal clearance provides a larger-than-normal clearance to accommodate thermal expansion and higher operating temperatures, reducing the risk of seizure during operation .
- Direct interchange with multiple major brand equivalents including KOYO 60/322RSC3, NTN 60/322RSC3, and SKF 60/322RSC3 .
- Manufactured to OE specifications with chrome steel rings and balls for durability and fatigue resistance .
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm bore diameter (22.00 mm) and outer diameter (60.00 mm) match your hub and axle before installation .
- This bearing is sealed on both sides – seals are non-removable and protect against contamination. Do not attempt to remove or disassemble the seals .
- Inspect the hub surface and axle shaft for wear or damage before installing new components.
- Apply even pressure when pressing the bearing into the hub – never apply force directly through the rolling elements. Do not use a hammer to strike the bearing.
- Bearing is factory-lubricated and sealed – no additional greasing required before installation .
- Torque all fasteners to Toyota service manual specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
