6910-2RS Wheel Bearing For HONDA
The DUHUI Bearing 6910-2RS is a single-row deep groove ball bearing with a 50 mm bore, 72 mm outer diameter, and 12 mm width. This thin-section automotive bearing features rubber seals on both sides (2RS) for contamination protection and is commonly used in automotive, electric motor, and industrial applications where compact design and reliable sealing are required. It matches Honda OE specification 6910-2RS and serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable sealed bearing solution.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3555 |
| Part Number | 6910-2RS |
| Product Type | Single Row Deep Groove Ball Bearing |
| Bore Diameter (d) | 50.00 mm (1.969 inch) |
| Outer Diameter (D) | 72.00 mm (2.835 inch) |
| Width (B) | 12.00 mm (0.472 inch) |
| Seals | 2RS – Rubber Seals Both Sides |
| Weight | 0.15 kg (0.33 lb) |
| Bearing Material | Chrome Steel |
| Cage Material | Steel Cage |
| Dynamic Load Rating (Cr) | 14.6 kN |
| Static Load Rating (C0r) | 11.8 kN |
| Limiting Speed (Grease) | 5,300 rpm |
| Temperature Range | -20°C to 120°C |
Note: Dimensional data is based on manufacturer published specifications. This is a thin-section bearing designed for compact assemblies. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3555
OE Numbers:
6910-2RS
Reference Numbers (Interchange):
SKF: 61910-2RS1, 6910-2RS
KOYO: 6910-2RS
NTN: 6910LLU
NSK: 6910DD
FAG: 6910-2RS
Vehicle Fitment
HONDA: Various passenger car and motorcycle applications – wheel hubs, transmissions, electric motors, and light-duty assemblies
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row deep groove ball bearing design supports radial loads and moderate axial loads in both directions. Simple and robust construction requires little maintenance and is suitable for high-speed applications.
- 2RS rubber seals on both sides provide excellent protection against dust, moisture, and contaminants while retaining lubricant for the service life of the bearing.
- Thin-section bearing design – ideal for applications where space is limited but larger bore diameters are required.
- Factory-lubricated and sealed – maintenance-free design requires no regreasing during service life.
- Direct interchange with multiple major brand equivalents including SKF 61910-2RS1, KOYO 6910-2RS, and NTN 6910LLU.
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm bore diameter (50.00 mm) and outer diameter (72.00 mm) match your housing and shaft before installation.
- This bearing is sealed on both sides – seals are non-removable and protect against contamination. Do not attempt to remove or disassemble the seals.
- Inspect the housing and shaft surfaces for wear or damage before installing new components.
- Apply even pressure when pressing the bearing into the housing or onto the shaft – never apply force directly through the rolling elements. Do not use a hammer to strike the bearing.
- Bearing is factory-lubricated and sealed – no additional greasing required before installation.
- Install in a clean environment to prevent contamination. Even small particles entering the bearing can shorten its service life.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
