6019-2RS Wheel Bearing For Audi
The DUHUI Bearing 6019-2RS is a single-row deep groove ball bearing with a 95 mm bore, 145 mm outer diameter, and 24 mm width. This large-size automotive bearing features rubber seals on both sides (2RS) for contamination protection and is designed for Audi vehicle applications including wheel hubs, transmission assemblies, and heavy-duty industrial equipment where high load capacity and reliable sealing are required . It matches OE specification 6019-2RS and serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable sealed bearing solution .
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3553 |
| Part Number | 6019-2RS |
| Product Type | Single Row Deep Groove Ball Bearing |
| Bore Diameter (d) | 95.00 mm (3.740 inch) |
| Outer Diameter (D) | 145.00 mm (5.709 inch) |
| Width (B) | 24.00 mm (0.945 inch) |
| Seals | 2RS – Rubber Seals Both Sides |
| Weight | 1.26 kg (2.78 lb) |
| Bearing Material | Bearing Steel |
| Cage Material | Steel Cage |
| Dynamic Load Rating (Cr) | 64.0 – 70.0 kN |
| Static Load Rating (C0r) | 56.0 – 61.0 kN |
| Limiting Speed (Grease) | 2,800 – 3,600 rpm |
| Temperature Range | -20°C to 120°C |
Note: Dimensional data is based on manufacturer published specifications from SKF, Timken, and FAG catalogs . This is a large-size sealed bearing designed for heavy-duty applications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3553
OE Numbers:
6019-2RS
Reference Numbers (Interchange):
SKF: 6019-2RS, 6019-2RS1
Timken: 6019-2RS
FAG: 6019-2RSR
NTN: 6019LLU
NSK: 6019DDU
KOYO: 6019-2RS
Vehicle Fitment
AUDI: Various passenger car applications – wheel hubs, transmission assemblies, and heavy-duty components
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row deep groove ball bearing design supports radial loads and moderate axial loads in both directions. Simple and robust construction requires little maintenance and is suitable for high-speed applications .
- 2RS rubber seals on both sides provide excellent protection against dust, moisture, and contaminants while retaining lubricant for the service life of the bearing .
- Large-size bearing design – ideal for applications requiring high load capacity, such as heavy-duty wheel hubs, transmissions, and industrial equipment.
- Factory-lubricated and sealed – maintenance-free design requires no regreasing during service life .
- Direct interchange with multiple major brand equivalents including SKF 6019-2RS1, Timken 6019-2RS, and FAG 6019-2RSR .
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm bore diameter (95.00 mm) and outer diameter (145.00 mm) match your housing and shaft before installation.
- This bearing is sealed on both sides – seals are non-removable and protect against contamination. Do not attempt to remove or disassemble the seals.
- Inspect the housing and shaft surfaces for wear or damage before installing new components.
- Apply even pressure when pressing the bearing into the housing or onto the shaft – never apply force directly through the rolling elements. Do not use a hammer to strike the bearing.
- Bearing is factory-lubricated and sealed – no additional greasing required before installation .
- Install in a clean environment to prevent contamination. Even small particles entering the bearing can shorten its service life.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
