C00033171 Wheel Hub Bearing For SAIC MAXUS
The DUHUI C00033171 is a complete wheel hub bearing assembly designed for SAIC Maxus G10 models. This roller-type hub assembly features a 6-stud design with an outer diameter of 161.2 mm, inner diameter of 45 mm, 48 ABS sensor ring teeth, and M12 x 1.5 thread size, matching OE specification C00033171. It is directly interchangeable with OEM parts for reliable performance.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0845 |
| Part Number | C00033171 |
| Outside Diameter | 161.20 mm (6.346 inch) |
| Inside Diameter 2 | 45.00 mm (1.772 inch) |
| Rim / Wheel Stud Quantity | 6-Hole |
| ABS Ring Number of Teeth | 48 |
| Number of Teeth | 45 |
| Thread Size | M12 x 1.5 |
| ABS Sensor Ring | Integrated |
| Bearing Type | Roller Type Bearing |
Note: Dimensional data is based on available sources. This is a wheel hub bearing assembly designed for SAIC Maxus G10 applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0845
OE Numbers: C00033171
Reference Numbers (Interchange):
SAIC MAXUS: C00033171
Vehicle Fitment
SAIC MAXUS: G10
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete wheel hub bearing assembly designed for SAIC Maxus G10 applications
- 6-stud design with 161.2 mm outer diameter and 45 mm inner diameter for precise fitment
- Integrated 48-tooth ABS sensor ring for plug-and-play compatibility
- Roller-type bearing design for enhanced load capacity and durability
- M12 x 1.5 thread size for standard wheel stud compatibility
- Pre-assembled hub design eliminates the need for a shop press during installation
- Pre-loaded bearing with factory-set preload for consistent performance
- Multi-lip seal design provides contamination protection and retains lubricant
- Direct interchange with OE number C00033171
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify dimensions (outer diameter 161.2 mm, inner diameter 45 mm, 6-bolt configuration) against your original part before installation
- Confirm fitment for your specific SAIC Maxus G10 model
- Clean the stub axle and hub mounting surface thoroughly before fitting the new assembly
- Torque the axle nut and mounting bolts to SAIC Maxus service manual specifications
- After installation, verify the ABS sensor ring is properly aligned and the warning light clears
- Verify smooth wheel rotation without noise or binding
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
