402022048R Wheel Hub Bearing For Dacia Renault
The DUHUI 402022048R wheel hub bearing is a direct-fit front axle replacement designed for Dacia Sandero II and Renault Captur I / Clio III models. This front wheel hub bearing meets OE specifications 402022048R, 402027463R, 7700412121, and 7700415121, delivering reliable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01549 |
| Part Number | 402022048R |
| Position | Front Axle |
| Outer Diameter | 120.90 mm (4.760 inch) |
| Width | 74.80 mm (2.945 inch) |
| Bolt Holes | 4 |
| Input Shaft Teeth | 23 |
| Hub Bearing Diameter | 37.00 mm (1.457 inch) |
| Wheel Stud Thread | M12 x 1.5 |
| Inner Thread | M8 x 1.25 |
Note: This front wheel hub bearing features a 4-bolt flange with 23 spline teeth, M12 x 1.5 wheel studs, and M8 x 1.25 inner thread. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01549
OE Numbers: 402022048R, 402027463R, 7700412121, 7700415121
Reference Numbers (Interchange):
DACIA: 402027463R, 7700412121
RENAULT: 7700412121, 7700415121
Vehicle Fitment
DACIA: Sandero II TCe 90 (2012-present), Sandero II TCe 90 LPG (2015-present)
RENAULT: Captur I 0.9 TCe 90 (2013-present), Clio III 1.5 dCi (2005-2012)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel hub bearing engineered for Dacia Sandero II and Renault Captur I / Clio III applications
- 4-bolt flange design with 23-spline input shaft for precise fitment
- M12 x 1.5 wheel stud thread and M8 x 1.25 inner thread match OE specifications
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers 402022048R, 402027463R, 7700412121, and 7700415121 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches 402022048R, 402027463R, 7700412121, or 7700415121 before installation
- Confirm the 4-bolt flange and 23-spline input shaft match your vehicle
- This is a front wheel hub bearing – ensure proper alignment with the drive axle
- Clean the hub mounting surface and steering knuckle thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Dacia/Renault service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
