40202JR70BABS Wheel Hub Bearing For Nissan
The DUHUI 40202JR70BABS wheel hub bearing is a direct-fit front axle replacement designed for Nissan Navara NP300 (D40) 4WD pickup models. This front wheel hub bearing meets OE specifications 40202JR70BABS and 40202JR70C, delivering reliable performance in the aftermarket. It is specifically engineered for vehicles with ABS, featuring an integrated ABS tone ring for seamless compatibility with vehicle safety systems .
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01541 |
| Part Number | 40202JR70BABS |
| Position | Front Axle |
| Outer Diameter | 139.80 mm (5.504 inch) |
| Bolt Hole Spacing | 61.10 mm (2.406 inch) |
| ABS | Equipped |
Note: This front wheel hub bearing is designed for Nissan Navara NP300 4WD vehicles with ABS. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01541
OE Numbers: 40202JR70BABS, 40202JR70C
Reference Numbers (Interchange):
NISSAN: 40202JR70BABS, 40202JR70C
SKF: VKBA7607
NPS: N470N58
GSP: 9329005
Vehicle Fitment
NISSAN: Navara NP300 (D40) 2.5 dCi 4WD (2005-present), Navara NP300 (D40) 2.5 dCi 4WD (D40M) (2009-present)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel hub bearing engineered for Nissan Navara NP300 4WD pickup applications
- Integrated ABS tone ring for seamless compatibility with vehicle ABS systems
- Heavy-duty construction designed for 4WD pickup load requirements
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers 40202JR70BABS and 40202JR70C for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches 40202JR70BABS or 40202JR70C before installation
- Confirm 4WD front axle fitment for your specific Nissan Navara NP300 model
- Ensure the ABS sensor is properly aligned with the tone ring during installation
- This is a heavy-duty 4WD application – ensure proper torque specifications are followed
- Clean the hub mounting surface and steering knuckle thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Nissan service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and verify ABS sensor function
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
