4350202100 Wheel Hub Bearing For Toyota
The DUHUI 4350202100 wheel hub bearing is a direct-fit front axle replacement designed for Toyota Avensis (_T22_) and Toyota Celica (_T23_) models. This front wheel hub bearing meets OE specification 4350202100, delivering reliable performance in the aftermarket. It features a 5-bolt flange with 26-spline input shaft for precise fitment.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01486 |
| Part Number | 4350202100 |
| Position | Front Axle |
| Outer Diameter | 125.00 mm (4.921 inch) |
| Height | 75.50 mm (2.972 inch) |
| Bolt Holes | 5 |
| Input Shaft Teeth | 26 |
Note: This front wheel hub bearing features a 5-bolt flange with 26 spline teeth. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01486
OE Numbers: 4350202100
Reference Numbers (Interchange):
TOYOTA: 4350202100
FREMAX: FWB0546
GSP: 9426030K
Vehicle Fitment
TOYOTA: Avensis (_T22_) 1.6 i (1997-2000), Celica Coupe (_T23_) 1.8 16V TS (1999-2005)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel hub bearing engineered for Toyota Avensis and Celica applications
- 5-bolt flange with 26-spline input shaft ensures precise engagement with the drive axle
- Double-row bearing design provides stable load distribution and minimizes vibration
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE number 4350202100 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number 4350202100 on your original bearing before installation
- Confirm the 5-bolt flange and 26-spline input shaft match your Toyota model
- Inspect the drive axle splines for wear or damage before fitting the new bearing
- Clean the hub mounting surface and steering knuckle thoroughly before installation
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Toyota service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
