RLB000070 Wheel Hub Bearing For WULING
The DUHUI RLB000070 wheel hub bearing is a direct-fit rear axle replacement designed for WULING vehicles, with cross-application compatibility across MG and ROVER models spanning multiple generations. This rear wheel hub bearing meets OE specifications RLB000070, GHK1685, and VKBA3610, delivering reliable performance in the aftermarket. It features an integrated 43-tooth ABS tone ring for seamless compatibility with vehicle safety systems.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0152 |
| Part Number | RLB000070 |
| Position | Rear Axle |
| Outer Diameter | 136.00 mm (5.354 inch) |
| Inner Diameter | 30.00 mm (1.181 inch) |
| Height | 67.00 mm (2.638 inch) |
| Bolt Holes | 4 |
| ABS Ring Teeth | 43 |
| Weight | 3.21 kg (7.08 lbs) |
Note: This rear wheel hub bearing features a 4-bolt flange with an integrated 43-tooth ABS tone ring. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0152
OE Numbers: RLB000070, GHK1685, VKBA3610
Reference Numbers (Interchange):
WULING: RLB000070
GHK1685
VKBA3610
Vehicle Fitment
WULING: Various models
MG: MG3 (1995-2005), MG ZS 2.0 TD (2004-2005), MG ZR (2001-2005)
ROVER: 200 (RF) 211 (1998-2000), 45 (RT) 2.0 V6 (2000-2005), 400 (RT) 416 Si (1995-2000)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered for WULING applications with cross-platform compatibility across MG and ROVER models
- Integrated 43-tooth ABS tone ring for seamless compatibility with vehicle ABS systems
- 4-bolt flange design provides precise fitment and secure mounting
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers RLB000070, GHK1685, and VKBA3610 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches RLB000070, GHK1685, or VKBA3610 before installation
- Confirm rear axle fitment for your specific WULING, MG, or ROVER model
- Ensure the ABS sensor is properly aligned with the 43-tooth tone ring during installation
- Clean the hub mounting surface and axle shaft thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to manufacturer service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and verify ABS sensor function
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
