3104100XKZ16B Wheel Hub Bearing For GREAT WALL
The DUHUI 3104100XKZ16B wheel hub bearing is a direct-fit rear axle replacement designed for GREAT WALL Haval F7 and F7X 2WD models from 2019 onward, equipped with ABS. This rear wheel hub bearing meets OE specification 3104100XKZ16B and features an integrated ABS sensor, delivering reliable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01101 |
| Part Number | 3104100XKZ16B |
| Position | Rear Axle |
| Outer Diameter | 109.70 mm (4.319 inch) |
| Bolt Holes | 5 |
| ABS Sensor | Integrated |
Note: This rear wheel hub bearing features a 5-bolt flange with an integrated ABS sensor. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01101
OE Numbers: 3104100XKZ16B
Reference Numbers (Interchange):
GREAT WALL: 3104100XKZ16B
Vehicle Fitment
GREAT WALL: Haval F7 (2WD, 2019-present), Haval F7X (2WD, 2019-present)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered specifically for GREAT WALL Haval F7 and F7X 2WD models
- Integrated ABS sensor for seamless compatibility with vehicle ABS systems
- 5-bolt flange design provides enhanced load distribution and stability
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE number 3104100XKZ16B for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number 3104100XKZ16B on your original bearing before installation
- Confirm rear axle 2WD fitment for your specific GREAT WALL model (Haval F7 or F7X)
- This is an integrated ABS hub assembly – ensure proper connection to the vehicle’s ABS wiring
- Clean the hub mounting surface and axle shaft thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to GREAT WALL service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and verify ABS sensor function
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
