A213301210 Wheel Hub Bearing For CHERY
The DUHUI A213301210 wheel hub bearing is a direct-fit rear axle replacement designed for CHERY Fora, Vortex Estina, A5, and E5 models with ABS. This rear wheel hub bearing meets OE specifications M113301210 and DACF3213668, delivering reliable performance in the aftermarket. It features a 4-bolt flange with M12 x 1.5 wheel studs and an integrated 48-tooth ABS ring.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0800 |
| Part Number | A213301210 |
| Position | Rear Axle |
| Outer Diameter | 137.00 mm (5.394 inch) |
| Inner Diameter 2 | 32.00 mm (1.260 inch) |
| Bolt Holes | 4 |
| Thread Size | M12 x 1.5 |
| ABS Ring Teeth | 48 |
| ABS Sensor | Equipped (with ABS sensor ring) |
Note: This rear wheel hub bearing features a 4-bolt flange with M12 x 1.5 wheel studs and an integrated 48-tooth ABS tone ring. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0800
OE Numbers: A213301210, M113301210, DACF3213668
Reference Numbers (Interchange):
CHERY: A213301210, M113301210, DACF3213668
Vehicle Fitment
CHERY: Fora (with ABS), Vortex Estina (with ABS), A5 (with ABS), E5 (with ABS)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered specifically for CHERY Fora, A5, and E5 models with ABS
- Integrated 48-tooth ABS tone ring for seamless compatibility with vehicle ABS systems
- 4-bolt flange design with M12 x 1.5 wheel studs for secure mounting
- Double-row bearing design provides stable load distribution and minimizes vibration
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers A213301210, M113301210, and DACF3213668 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches A213301210, M113301210, or DACF3213668 before installation
- Confirm the 4-bolt flange and M12 x 1.5 wheel studs match your CHERY rear hub
- This is an ABS-equipped hub assembly – confirm your vehicle has ABS before ordering
- Ensure the ABS sensor is properly aligned with the 48-tooth tone ring during installation
- Clean the hub mounting surface and axle shaft thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to CHERY service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and verify ABS sensor function
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
