713621520 Wheel Hub Bearing For Toyota
The DUHUI 713621520 wheel hub bearing is a direct-fit front axle replacement designed for Toyota Corolla hatchback and Prius models. This front wheel hub bearing meets OE specification 4355047020, delivering reliable performance in the aftermarket. It features a 5-bolt flange with 135mm flange diameter for secure fitment .
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01503 |
| Part Number | 713621520 |
| Position | Front Axle |
| Outer Diameter | 85.00 mm (3.346 inch) |
| Flange Diameter | 135.00 mm (5.315 inch) |
| Bolt Holes | 5 |
Note: This front wheel hub bearing features a 5-bolt flange. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01503
OE Numbers: 713621520, 4355047020
Reference Numbers (Interchange):
TOYOTA: 4355047020
A.B.S.: 201065
FAG: 713621520
GSP: 9326069
OPTIMAL: 981714
SKF: VKBA7486
TRISCAN: 853013158
Vehicle Fitment
TOYOTA: Corolla Hatchback (E21) 1.2 4WD (2019-present), Prius (W5) 1.8 Hybrid (2015-2022)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel hub bearing engineered for Toyota Corolla and Prius applications
- 5-bolt flange design with 135mm flange diameter for enhanced load distribution
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE number 4355047020 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches 4355047020 before installation
- Confirm the 5-bolt flange matches your Toyota front hub
- Clean the hub mounting surface and steering knuckle thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Toyota service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
