VKBA7745 Wheel Hub Bearing For Mazda
The DUHUI VKBA7745 wheel hub bearing is a direct-fit front axle left-side replacement designed for Mazda 2 hatchback models from 2014 onward. This front wheel hub bearing meets OE specifications D09H3304X, D09H3304XA, and DA7H3304XA, delivering reliable performance in the aftermarket. It features a 4-bolt flange with an integrated 44-tooth ABS ring and M12 x 1.5 wheel studs for precise fitment.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01502 |
| Part Number | VKBA7745 |
| Position | Front Axle (Left) |
| Outer Diameter | 122.00 mm (4.803 inch) |
| Bolt Holes | 4 |
| Thread Size | M12 x 1.5 |
| ABS Ring Teeth | 44 |
| Weight | 2.33 kg (5.14 lbs) |
| ABS Sensor | Equipped |
Note: This front wheel hub bearing is a left-side specific assembly featuring a 4-bolt flange with M12 x 1.5 wheel studs and an integrated 44-tooth ABS tone ring. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01502
OE Numbers: D09H3304X, D09H3304XA, DA7H3304XA, 43502WB001, 43502WB002, 43502WB003, 43502WB004
Reference Numbers (Interchange):
MAZDA: D09H3304X, D09H3304XA, DA7H3304XA
TOYOTA: 43502WB001, 43502WB002, 43502WB003, 43502WB004
SKF: VKBA7745
A.B.S.: 200161
BORG & BECK: BWK1549
GSP: 9326064
HERTH+BUSS JAKOPARTS: J4703047
MDR: GSP9326064
NK: 753233
Vehicle Fitment
MAZDA: 2 Hatchback (DL, DJ) 1.5 (2014-present)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel hub bearing engineered for Mazda 2 hatchback left-side applications
- Integrated 44-tooth ABS tone ring for seamless compatibility with vehicle ABS systems
- 4-bolt flange design with M12 x 1.5 wheel studs for precise fitment
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers D09H3304X, D09H3304XA, and DA7H3304XA for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches D09H3304X, D09H3304XA, or DA7H3304XA before installation
- Confirm this is the left-side front axle bearing for your Mazda 2 model (2014 onward)
- Ensure correct orientation – this bearing is side-specific (left)
- Ensure the ABS sensor is properly aligned with the 44-tooth tone ring during installation
- Clean the hub mounting surface and steering knuckle thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Mazda service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and verify ABS sensor function
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
