5147520001 Wheel Hub Bearing For POLESTAR VOLVO
The DUHUI 5147520001 wheel hub bearing is a direct-fit rear axle replacement designed for Polestar 2 electric vehicles and Volvo S60/XC60 mild-hybrid models. This rear wheel hub bearing meets OE specifications 31476968, 32221051, 32246178, and 32315306, delivering reliable performance in the aftermarket. It features an integrated 96-tooth ABS ring with a 108mm bolt circle for precise fitment.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01501 |
| Part Number | 5147520001 |
| Position | Rear Axle |
| Outer Diameter | 135.80 mm (5.346 inch) |
| Bolt Circle Diameter | 108.00 mm (4.252 inch) |
| Width | 91.80 mm (3.614 inch) |
| ABS Ring Teeth | 96 |
Note: This rear wheel hub bearing features an integrated 96-tooth ABS tone ring with 108mm bolt circle. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01501
OE Numbers: 31476968, 32221051, 32246178, 32315306
Reference Numbers (Interchange):
VOLVO: 31476968, 32221051, 32246178, 32315306
SKF: VKBA7142
A.B.S.: 200114
APEC: AWB1529
BORG & BECK: BWK1586
COMLINE: CHA438
FIRST LINE: FBK1586
GSP: 9400618, 9400618K
METZGER: WM2329
MEYLE: 5147520001
MOTAQUIP: LVBW1872
NAPA: PWB1529
NK: 764824
OPTIMAL: 892492
Vehicle Fitment
POLESTAR: 2 (534) EV (2021-present)
VOLVO: S60 III (224) B3 MHEV (2020-2023), XC60 II (246) 2.0 B5 Mild-Hybrid (2022-present)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered for Polestar 2 EV and Volvo SPA platform vehicles
- Integrated 96-tooth ABS tone ring for precise wheel speed detection
- 108mm bolt circle and 135.8mm outer diameter for precise fitment
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers 31476968, 32221051, 32246178, and 32315306 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches 31476968, 32221051, 32246178, or 32315306 before installation
- Confirm rear axle fitment for your specific Polestar 2 or Volvo SPA platform vehicle
- Ensure the ABS sensor is properly aligned with the 96-tooth tone ring during installation
- Clean the hub mounting surface and axle shaft thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to manufacturer service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and verify ABS sensor function
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
