VKBA7541 Wheel Hub Bearing For TOYOTA
The DUHUI VKBA7541 wheel hub bearing is a direct-fit rear axle replacement designed for Toyota Verso (_R2_) models from 2009 to 2018. This rear wheel hub bearing meets OE specifications 424500F020 and 424500F021, delivering reliable performance in the aftermarket. It features a 5-bolt flange for secure fitment.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01500 |
| Part Number | VKBA7541 |
| Position | Rear Axle |
| Outer Diameter 1 | 152.00 mm (5.984 inch) |
| Width 1 | 64.00 mm (2.520 inch) |
Note: This rear wheel hub bearing features a 5-bolt flange. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01500
OE Numbers: 424500F020, 424500F021
Reference Numbers (Interchange):
TOYOTA: 424500F020, 424500F021
SKF: VKBA7541
Automotive Bearings: BRT1920
DELPHI: BK1649
FIRST LINE: FBK1156
MOOG: TOWB12954
SNR: R169118
Vehicle Fitment
TOYOTA: Verso (_R2_) 1.6 (ZGR20_) (2009-2018)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered for Toyota Verso applications
- 5-bolt flange design for enhanced load distribution and stability
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers 424500F020 and 424500F021 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches 424500F020 or 424500F021 before installation
- Confirm the 5-bolt flange matches your Toyota Verso rear hub
- Clean the hub mounting surface and axle shaft thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Toyota service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
