43202ED51B Wheel Hub Bearing For Nissan
The DUHUI 43202ED51B wheel hub bearing is a direct-fit rear axle left-side replacement designed for Nissan Tiida, Cube, and Bluebird Sylphy models. This rear wheel hub bearing meets OE specifications 43202ED51B, 0282G11R, and HW22051, delivering reliable performance in the aftermarket. It features an integrated ABS sensor ring and a 4-bolt flange design for precise fitment.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01573 |
| Part Number | 43202ED51B |
| Position | Rear Axle |
| Side | Left |
| Outer Diameter 1 | 68.00 mm (2.677 inch) |
| Outer Diameter 2 | 148.00 mm (5.827 inch) |
| Height | 69.00 mm (2.717 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Bolt Holes | 4 |
| ABS | Equipped |
Note: This rear wheel hub bearing features a 4-bolt flange with 114.3mm bolt circle and integrated ABS sensor. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01573
OE Numbers: 43202ED51B, 0282G11R, HW22051
Reference Numbers (Interchange):
NISSAN: 43202ED51B, 0282G11R, HW22051
Vehicle Fitment
NISSAN: Cube (Z12) 1.5 dCi (2010-present), Cube (Z12) 1.6 16V (2009-present)
NISSAN: Tiida Hatchback (C11) 1.5, 1.5 dCi, 1.6, 1.8 (2004-2012)
NISSAN: Tiida Saloon (SC11) 1.5 dCi, 1.6, 1.8 (2007-2012)
NISSAN: Bluebird Sylphy (G11)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered for Nissan Tiida, Cube, and Bluebird Sylphy applications
- Left-side specific fitment for precise installation
- Integrated ABS sensor for seamless compatibility with vehicle ABS systems
- 4-bolt flange design with 114.3mm bolt circle for secure fitment
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers 43202ED51B, 0282G11R, and HW22051 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches 43202ED51B, 0282G11R, or HW22051 before installation
- Confirm this is the left-side rear axle bearing for your specific Nissan model
- This is an ABS-equipped hub assembly – confirm your vehicle has ABS before ordering
- Ensure the ABS sensor is properly aligned with the tone ring during installation
- Clean the hub mounting surface and axle shaft thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Nissan service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and verify ABS sensor function
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
