4245012120 Wheel Hub Bearing For Toyota
The DUHUI 4245012120 wheel hub bearing is a direct-fit rear axle left-side replacement designed for Toyota Corolla Saloon (_E15_) models. This rear wheel hub bearing meets OE specifications 4245012120, HW21049, and 3DACF027F10S, delivering reliable performance in the aftermarket. It features a 4-bolt flange design with integrated ABS sensor for precise fitment .
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01572 |
| Part Number | 4245012120 |
| Position | Rear Axle |
| Side | Left |
| Outer Diameter 1 | 55.00 mm (2.165 inch) |
| Outer Diameter 2 | 135.00 mm (5.315 inch) |
| Height | 54.50 mm (2.146 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Bolt Holes | 4 |
| ABS Sensor | Equipped |
Note: This rear wheel hub bearing features a 4-bolt flange with 100mm bolt circle and integrated ABS sensor. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01572
OE Numbers: 4245012120, HW21049, 3DACF027F10S, 3DACF027F10SAM
Reference Numbers (Interchange):
TOYOTA: 4245012120
HW21049
3DACF027F10S
Vehicle Fitment
TOYOTA: Corolla Saloon (_E15_) 1.8 (ZRE142) (2006-2014)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered for Toyota Corolla (_E15_) applications
- Left-side specific fitment for precise installation
- Integrated ABS sensor for seamless compatibility with vehicle ABS systems
- 4-bolt flange design with 100mm bolt circle for secure fitment
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers 4245012120, HW21049, and 3DACF027F10S for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches 4245012120, HW21049, or 3DACF027F10S before installation
- Confirm this is the left-side rear axle bearing for your Toyota Corolla (_E15_) model
- This is an ABS-equipped hub assembly – confirm your vehicle has ABS before ordering
- Ensure the ABS sensor is properly aligned with the tone ring during installation
- Clean the hub mounting surface and axle shaft thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Toyota service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and verify ABS sensor function
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
