0182ACV51RRH Wheel Hub Bearing For Toyota
The DUHUI 0182ACV51RRH wheel hub bearing is a direct-fit rear axle right-side replacement designed for Toyota Camry (_V5_) and Aurion (_V5_) models. This rear wheel hub bearing meets OE specifications 0182ACV51RRH, 4245006130, and 4245006160, delivering reliable performance in the aftermarket. It is also cross-referenced with FEBEST 0182ACV51RRH and is designed for use with vehicles equipped with ABS .
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01516 |
| Part Number | 0182ACV51RRH |
| Position | Rear Axle |
| Side | Right Hand (RH) |
| Outer Diameter | 152.00 mm (5.984 inch) |
| Width | 112.00 mm (4.409 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Bolt Holes | 5 |
| ABS Ring Teeth | 96 |
| Thread Size | M12 x 1.5 |
| Connector Flanges | 4 |
| Weight | 3.50 kg (7.72 lbs) |
| ABS Sensor | Equipped (with sensor) |
Note: This rear wheel hub bearing features a 5-bolt flange with 114.3mm bolt circle, 96-tooth ABS ring, and integrated ABS sensor. Please verify measurements against your original parts before ordering .
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01516
OE Numbers: 4245006130, 4245006160
Reference Numbers (Interchange):
TOYOTA: 4245006130, 4245006160
FEBEST: 0182ACV51RRH
764567, 764568, 982372, 221962
VKBA7690
4329283SX, HA590424
Vehicle Fitment
TOYOTA: Aurion (_V5_) 3.5 (GSV50) (2011-present)
TOYOTA: Camry Saloon (_V5_) 2.0 (ACV51_) (2011-2014)
TOYOTA: Camry Saloon (_V5_) 2.0 (ASV51_) (2015-2018)
TOYOTA: Camry Saloon (_V5_) 2.5 (ASV50_) (2011-2018)
TOYOTA: Camry Saloon (_V5_) 2.5 Hybrid (AVV50_) (2011-2017)
TOYOTA: Camry Saloon (_V5_) 3.5 (GSV50_) (2012-2018)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered for Toyota Camry and Aurion applications
- Right-side specific fitment for precise installation
- Integrated 96-tooth ABS tone ring and sensor for seamless compatibility with vehicle ABS systems
- 5-bolt flange design with 114.3mm bolt circle for enhanced load distribution
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers 4245006130 and 4245006160 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches 4245006130 or 4245006160 before installation
- Confirm this is the right-side rear axle bearing for your specific Toyota model
- This is an ABS-equipped hub assembly – confirm your vehicle has ABS before ordering
- Ensure the ABS sensor is properly aligned with the 96-tooth tone ring during installation
- Clean the hub mounting surface and axle shaft thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Toyota service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and verify ABS sensor function
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
