8WD501611 Wheel Hub Bearing For Audi
The DUHUI 8WD501611 wheel hub bearing is a direct-fit rear axle replacement designed for Audi A4L (B8/B9) and related MQB platform vehicles. This rear wheel hub bearing meets OE specification 8WD501611 and is also compatible with 8K0 501 611, delivering reliable performance in the aftermarket. It features an integrated ABS sensor and is engineered for 2WD rear axle applications.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01576 |
| Part Number | 8WD501611 |
| Position | Rear Axle |
| ABS Sensor | Equipped |
Note: Dimensional data is based on available sources. This is a rear wheel hub bearing assembly designed for Audi 2WD applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01576
OE Numbers: 8WD501611, 8K0 501 611, 8KD501611, 8K0 598 611
Reference Numbers (Interchange):
AUDI: 8K0 501 611 A, 8W0 501 611 B, 8KD 598 611
VW: 2QB 501 611 A
BLUE PRINT: ADV188202C
FEBI BILSTEIN: 36650
SKF: VKBA 6550
FAG: 713 6110 30, 713 6108 90
GSP: 9232032
OPTIMAL: 170138
MOOG: AU-WB-11072
SNR: R151.44
METZGER: WM 6650
A.B.S.: 201480
Vehicle Fitment
AUDI (2WD, rear axle): A4L (B8) (2009-2016), A4L (B9) (2016-present), A4 (B8) (2007-2015), A5 (2007-2017), A6L (C7) (2012-2018)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered for Audi A4L and related MQB platform vehicles
- Integrated ABS sensor for seamless compatibility with vehicle ABS systems
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers 8WD501611, 8K0 501 611, and 8KD501611 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches 8WD501611, 8K0 501 611, or 8KD501611 before installation
- This is a rear axle hub assembly for 2WD vehicles – confirm your vehicle’s drive configuration
- This is an ABS-equipped hub assembly – confirm your vehicle has ABS before ordering
- Ensure the ABS sensor is properly aligned with the tone ring during installation
- Clean the hub mounting surface and axle shaft thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Audi service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and verify ABS sensor function
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
