S63104110 Wheel Hub Bearing For BYD
The DUHUI S63104110 wheel hub bearing is a direct-fit rear axle replacement designed for BYD S6 and M6 models. This rear wheel hub bearing meets OE specifications S63104110, 3104110, M63104100, M63104110, and S63104100, delivering reliable performance in the aftermarket. It features a 5-bolt flange design for enhanced load distribution and stability.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0855 |
| Part Number | S63104110 |
| Position | Rear Axle |
| Bolt Holes | 5 |
Note: This rear wheel hub bearing features a 5-bolt flange design. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0855
OE Numbers: S63104110, 3104110, M63104100, M63104110, S63104100
Reference Numbers (Interchange):
BYD: S63104110, 3104110, M63104100, M63104110, S63104100
Vehicle Fitment
BYD: S6 (2011-2016, 1.5T, 2.0L, 2.4L, rear axle), M6 (rear axle)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered specifically for BYD S6 and M6 models
- 5-bolt flange design provides enhanced load distribution and stability
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers S63104110, 3104110, M63104100, M63104110, and S63104100 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches S63104110, 3104110, M63104100, M63104110, or S63104100 before installation
- Confirm the 5-bolt flange matches your BYD rear hub
- Confirm rear axle fitment for your specific BYD model (S6 2011-2016 or M6)
- Clean the hub mounting surface and axle shaft thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to BYD service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
