952551 Wheel Hub Bearing For Mitsubishi
The DUHUI 952551 wheel hub bearing is a direct-fit front axle replacement designed for Mitsubishi Carisma, Colt V, and related models. This front wheel hub bearing meets OE specification 952551 and is directly interchangeable with SKF VKBA6868 and FAG 713619880, delivering reliable performance in the aftermarket. It features a 4-bolt flange design for precise fitment.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01513 |
| Part Number | 952551 |
| Position | Front Axle |
| Outer Diameter 1 | 125.00 mm (4.921 inch) |
| Inner Diameter 1 | 28.00 mm (1.102 inch) |
| Height 1 | 71.00 mm (2.795 inch) |
| Bolt Holes | 4 |
| Weight | 2.26 kg (4.98 lbs) |
Note: This front wheel hub bearing features a 4-bolt flange design. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01513
OE Numbers: 952551, ADC48331, BK1612, 713619880, J4715030, N4715051
Reference Numbers (Interchange):
MITSUBISHI: 952551, ADC48331
SKF: VKBA6868
FAG: 713619880
J4715030, N4715051, BK1612, R173.45
Vehicle Fitment
MITSUBISHI: Carisma (DA) 1.6 (1995-2006), Carisma 1.9 TD (1996-2000), Carisma Saloon 1.6 (1996-2006), Carisma Saloon 1.9 TD (1996-2000)
MITSUBISHI: Colt V (CJ, CP) 1.3 (2000-2003), Colt V 1.6 GLX 16V (1996-2000), Colt V 1300 GL, GLX (1996-2000)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel hub bearing engineered for Mitsubishi Carisma and Colt V applications
- 4-bolt flange design provides precise fitment and secure mounting
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers 952551, ADC48331, and BK1612 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches 952551, ADC48331, or BK1612 before installation
- Confirm the 4-bolt flange matches your Mitsubishi front hub
- Confirm front axle fitment for your specific Mitsubishi model
- Clean the hub mounting surface and steering knuckle thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Mitsubishi service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
